Gear Group (Rear)
Show/hide table
| |
| Illustration 1 | g03199436 |
Show/hide table
| Specification for 382-4494 Rear Gear Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 7E-3897 Camshaft Drive Gear | Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. Clean with alcohol wipe. |
| 2 | 2 | 112-1554 Idler Gear As | After installation, bore of 125-9751 Bushing is Installation depth of the bushing is |
| 3 | 1 | 4P-5459 Balancer Gear Assembly | After installation, bore of 4P-5438 Bushing is Installation depth of the bushing is |
| 4 | 2 | 101-1368 Thrust Washer | Thickness is |
| 5 | 1 | 4P-5437 Gear Shaft | Diameter is |
| 6 | 4 | 8M-2530 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g03199437 |
|
Rear view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 7 | 4 | 1B-4367 Bolt | Torque to |
| 8 | 2 | 8S-2331 Bolt | Torque to |
| 9 | 2 | 112-1552 Idler Shaft | Diameter is |
Caterpillar Information System:
C32 Auxiliary Engine Starting the Engine
2012/10/30 An Improved One Piece Torque Converter Housing is Used on Certain CX31 and CX35 Transmissions {3105}
2012/08/24 An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
C18 Marine Engine Model View Illustrations
320D2 Excavator Engine Oil Level - Check
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805} 256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805} 398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805} 398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
C32 Marine Generator Set Product Description
C32 Auxiliary Engine Manual Stop Procedure
C7.1 Marine Generator Set Product Lifting
G3500 Engines Gear Group (Rear)
G3500 Engines Stub Shaft (Front)
G3500 Engines Cylinder Head Valves
C7.1 Marine Generator Set Control Panel - Marine Classification Society (MCS) Control Panel (If Equipped)
G3500 Engines Cylinder Head Valves
2012/12/06 A New Outlet Elbow Is Used with the Oil Cooler Adapter on Certain 3516B and 3516C Engines {1380}
G3516 Engines Accessory Drive (Lower Left Hand)
C175-16 Locomotive Engine Fuel Transfer Pump - Install
330F MHPU Mobile Hydraulic Power Unit Machine System Hydraulic Tank and Filter
G3500 Engines Gear Group (Rear)
G3500 Engines Gear Group (Rear)
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Fuel System