C18 Marine Engines Caterpillar


Heat Exchanger - Disassemble

Usage:

C18 DTP

Disassembly Procedure

Start By:

  1. Remove the heat exchanger.


    Illustration 1g03123097

  1. Remove bolts (1), bonnet (2), and o-ring (3).

  2. Remove bolts (4), plate (5), and o-ring (6).


    Illustration 2g03123598

  3. Remove bolts (13), return bonnet (12), and o-ring (11).

  4. Remove bolts (10), spacer (9), and o-ring (8).

  5. Remove core assembly (7).

Caterpillar Information System:

C7.1 Industrial Engine Flexible Exhaust Pipe
UPS 250 and UPS 300 Uninterruptible Power Supplies General Hazard Information
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Diagnostic Trouble Codes
C7.1 Engines for Caterpillar Built Machines Alternator
C7.1 Engines for Caterpillar Built Machines Starter Motor
G3500 Engines Camshaft
C13 Tier 4 Final Engines Engine Support (Front)
C13, C15, and C18 Tier 4 Final Engines Water Lines
G3500B Engines Cylinder Block
CEM Locomotive Aftertreatment Product Storage
Procedure for Testing the Vacuum Pump On Certain Uninterruptible Power Supply{4287} Procedure for Testing the Vacuum Pump On Certain Uninterruptible Power Supply{4287}
C4.4 Engines for Caterpillar Built Machines Piston and Rings
Alignment Procedure for Certain G3500 Generator Set Engines with Gearbox {7002} Alignment Procedure for Certain G3500 Generator Set Engines with Gearbox {7002}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Solenoid Valve - Test
C9.3 Tier 4 Final Engines Electric Starting Motor
C9.3 Tier 4 Final Engines Flywheel
UPS 250 and UPS 300 Uninterruptible Power Supplies Device Bus Network
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Event Codes
C13, C15, and C18 Tier 4 Final Engines Exhaust Diffuser Adapter
C18 Marine Engines Heat Exchanger - Assemble
CEM Locomotive Aftertreatment Diesel Exhaust Fluid Nozzle - Inspect/Clean
CEM Locomotive Aftertreatment Exhaust Inlet Nitrogen Oxide Sensor - Replace
2012/07/13 A New Replacement Gas Regulator Is Available for G342, G343, G353, G379, G398, and G399 Engines {1000, 1270}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Service Tools
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.