Cylinder Head
Show/hide table
图 1 | g03120176 |
Show/hide table
380-5795 缸盖总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 2     | 130-2607 气门座圈     | 安装时,通过降低温度(推荐温度: −60° C (−76° F))收缩气门座圈并将座圈放到缸盖沉孔中。     |
2     | 2     | 130-2608 气门座圈     | 安装时,通过降低温度(推荐温度: −60° C (−76° F))收缩气门座圈并将座圈放到缸盖沉孔中。     |
3     | 5     | 3B-0645 杯塞     | 组装前,将高强度或高温厌氧法兰密封胶涂覆到孔中。     |
4     | 1     | 3B-0623 杯形塞     | 组装前,将高强度或高温厌氧法兰密封胶涂覆到孔中。     |
5     | 2     | 3B-0623 杯形塞     | 组装前,将高强度或高温厌氧法兰密封胶涂覆到孔中。 安装深度 (E) 为 1.0 ± 0.5 mm (0.04 ± 0.02 in)。     |
6     | 2     | 3B-0623 杯形塞     | 组装前,将高强度或高温厌氧法兰密封胶涂覆到孔中。 安装深度 (D) 为 9.0 ± 0.5 mm (0.35 ± 0.02 in)。     |
Show/hide table
图 2 | g03117917 |
Show/hide table
项目     | 数量     | 零件     | 技术规格说明     |
7     | 6     | 131-0420 缸盖紧固件总成     | 使用以下步骤拧紧缸盖螺栓: 请参阅图 2 了解拧紧顺序。 1. 组装前,将清洁的发动机机油涂抹到螺栓的螺纹上。 2. 按数字顺序将螺栓 1 至螺栓 8 拧紧至 30 ± 5 N·m (22 ± 4 lb ft)。 3. 再次按数字顺序将螺栓 1 至螺栓 8 拧紧至 200 ± 15 N·m (148 ± 11 lb ft)。 4. 再次按数字顺序将螺栓 1 至螺栓 8 重新拧紧至 200 ± 15 N·m (148 ± 11 lb ft)。 5. 按数字顺序将螺栓 1 至螺栓 8 转动 180 ± 5 度。 6. 只有在螺栓 1 至螺栓 8 达到最终扭矩后,才拧紧两只螺栓 (9) 。 7. 拧紧两只螺栓 (9) 至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。     |
8     | 2     | 131-0421 缸盖紧固件总成     | |
9     | 2     | 5B-0213 螺栓     |
Caterpillar Information System:
3500B and 3500C Marine Engines Exhaust Manifold
3512B and 3512C Petroleum Generator Set Engines Turbocharger
3512B and 3512C Petroleum Generator Set Engines Exhaust Manifold
3500B and 3500C Marine Engines Fuel Injector
3500C Marine Engines Fuel Filter
Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251} Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251}
3516B Generator Set with Dynamic Gas Blending Turbocharger
C32 Marine Engine Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Engines General Information
G3300 Engines Alternator and Fan Belts - Inspect/Adjust/Replace
G3300 Engines Maintenance Interval Schedule - Standby
G3300 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
3500B High Displacement Locomotive Engines Fuel Injector
3516C Generator Set Engines Engine Oil Lines
3500B Generator Set Engines Turbocharger
2012/10/11 A Summary of Updates for Type 2 C175-16 Engines {1000}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
374F Excavator Machine Systems Joystick and Pedal - Calibrate
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Function
CX48-P2300 Petroleum Transmission Power Train Electronic Control System System Protection Functions
C32 Marine Engines Air Inlet and Exhaust System
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Input Components
C32 Marine Engine Model View Illustrations
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Output Components