3512B and 3512C Petroleum Generator Set Engines Caterpillar


Turbocharger

Usage:

3512B 9G8


Illustration 1g03487479
Typical example

Table 1
Specification for 379-5300 Turbocharger Gp and 446-5023 Turbocharger Gp 
Item  Qty  Part  Specification description 
6L-3005 Band Clamp  Use the following procedure to tighten the band clamp.
1. Tighten the band clamp to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in).
2. Gently hit around the band clamp with a soft hammer.
3. Again, tighten the band clamp to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in)
16  2N-2765 High Temperature Bolt  Before assembly, apply Loctite C5A Copper anti-seize to washer face and threads. 
9N-2038 Turbine Clamp As  Use the following procedure to tighten the turbine clamp assemblies.
1. Tighten the turbine clamp assemblies to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently hit around the turbine clamp assemblies with a soft hammer.
3. Again, tighten the turbine clamp assemblies to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)
4W-9977 Clamp As  Use the following procedure to tighten the clamp assemblies.
1. Tighten the clamp assemblies to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently hit around the clamp assemblies with a soft hammer.
3. Again, tighten the clamp assemblies to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)

Caterpillar Information System:

3512B and 3512C Petroleum Generator Set Engines Exhaust Manifold
3500B and 3500C Marine Engines Fuel Injector
3500C Marine Engines Fuel Filter
Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251} Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251}
3516B Generator Set with Dynamic Gas Blending Turbocharger
C32 Marine Engine Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Engines General Information
G3300 Engines Alternator and Fan Belts - Inspect/Adjust/Replace
G3300 Engines Maintenance Interval Schedule - Standby
G3300 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
G3300 Engines Maintenance Interval Schedule - Naturally Aspirated
2012/08/03 A New Redundant ECM Cross-Over Harness Is Used for C175-16 Petroleum Engines {1408, 4460, 7426}
3500B and 3500C Marine Engines Exhaust Manifold
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Head
3500B High Displacement Locomotive Engines Fuel Injector
3516C Generator Set Engines Engine Oil Lines
3500B Generator Set Engines Turbocharger
2012/10/11 A Summary of Updates for Type 2 C175-16 Engines {1000}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
374F Excavator Machine Systems Joystick and Pedal - Calibrate
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Function
CX48-P2300 Petroleum Transmission Power Train Electronic Control System System Protection Functions
C32 Marine Engines Air Inlet and Exhaust System
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Input Components
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.