3500 Industrial Engines Caterpillar


Cylinder Head Valves

Usage:

3516 BR3


图 1g03111305

表 1
技术规格 - 380-5797 缸盖总成 
项目  数量  零件  技术规格说明 
210-2542 进气阀  组装前,用清洁的发动机机油涂覆进气阀杆。
气门杆直径 (C) 为 9.441 ± 0.010 mm (0.3717 ± 0.0004 inch)
气门头直径 (E) 为 56.00 ± 0.15 mm (2.205 ± 0.006 inch)
端面角度为 19.40 ± 0.25 度。 
194-4897 排气门  组装前,用清洁的发动机机油涂覆排气阀杆。
气门杆直径 (D) 为 12.464 ± 0.025 mm (0.4907 ± 0.0010 inch)
气门头直径 (F) 为 56.00 ± 0.15 mm (2.205 ± 0.006 inch)
端面角度为 45.6 ± 0.25 度。 
316-5976 弹簧  测试力下的长度为 60.29 mm (2.374 inch)
测试力为 460 ± 23 N (103 ± 5 lb)
测试后的自由长度为 74.8 mm (2.94 inch)。 
316-5977 弹簧  测试力下的长度为 57.5 mm (2.26 inch)
测试力为 248.0 ± 12.4 N (55.8 ± 2.8 lb)
测试后的自由长度为 71.4 mm (2.81 inch)。 
316-5980 气门杆密封件  将阀杆密封件安装到进气阀上。 
316-5981 垫圈  将垫圈安装到排气阀上。 
133-9306 气门导管  安装前进气门导管的孔径为 9.502 ± 0.013 mm (0.3741 ± 0.0005 inch)。 
197-6995 气门导管  安装前排气门导管的孔径为 12.642 ± 0.013 mm (0.4977 ± 0.0005 inch)。 
130-2607 气门座镶圈  缸盖上气阀座镶圈的深度 (G) 为 15.00 mm (0.591 inch)
进气门座镶圈的直径为 60.627 ± 0.015 mm (2.3869 ± 0.0006 inch)
缸盖的缸径为 60.508 ± 0.025 mm (2.3822 ± 0.0010 inch)
端面角度为 20.00 ± 0.25 度。 
10  130-2608 气门座镶圈  缸盖上气阀座镶圈的深度 (H) 为 15.00 mm (0.591 inch)
排气门座镶圈的直径为 60.119 ± 0.015 mm (2.3669 ± 0.0006 inch)
缸盖的缸径为 60.000 ± 0.025 mm (2.3622 ± 0.0010 inch)
端面角度为 45.00 ± 0.25 度。 
239-0689 定位销  从缸盖顶部到定位销顶部的高度为 30.0 ± 1.0 mm (1.18 ± 0.04 inch)。 
从缸盖顶部到气门导管顶部的高度为 26.0 ± 1.0 mm (1.02 ± 0.04 inch)。 

Caterpillar Information System:

C7.1 Industrial Engine Soot Antenna
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
3500C Marine Engines Cylinder Head Valves
C7.1 Industrial Engine Configuration Parameters
3500 Industrial Engines Cylinder Head
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
3500B High Displacement Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Oil Lines
3500B High Displacement Turbocharger Oil Lines
3516B Engine Model View Illustrations
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Rear) - Remove and Install
C7.1 Industrial Engine Turbocharger - Inspect
2014/03/07 New Exhaust Elbows and Bellows Are Used for the Turbine Inlets on Certain G3516B and G3520B Engines {1052, 1059}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.