C7.1 Industrial Engine Caterpillar


Soot Antenna

Usage:

C7.1 881

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Bostik Pure Nickel
Anti-Seize Compound 


Illustration 1g03087197
Typical example

Note: Apply Tooling (A) to the sensors before the sensors are installed.

(1) Tighten the soot sensor antennas to the following torque. ... 45 N·m (33 lb ft)

Tighten the harness for the soot sensor antennas (not shown) to the following torque. ... 1.2 N·m (11 lb in)

Caterpillar Information System:

C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
3500C Marine Engines Cylinder Head Valves
C7.1 Industrial Engine Configuration Parameters
3500 Industrial Engines Cylinder Head
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
3500 Industrial Engines Cylinder Head Valves
3500B High Displacement Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Oil Lines
3500B High Displacement Turbocharger Oil Lines
3516B Engine Model View Illustrations
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Rear) - Remove and Install
C7.1 Industrial Engine Turbocharger - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.