Fuel Filter Housings - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 138-7573 | 连杆支架 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 和适当的起吊设备连接到燃油滤清器壳体 (2) 上。 燃油滤清器壳体 (2) 的重量约为 122 kg (269 lb)。
Show/hide table
 | |
| 图 1 | g03085538 |
- 将燃油滤清器壳体 (2) 定位到后壳体上后安装六条螺栓 (1) 。
- 连接燃油管 (3) 。
Show/hide table
 | |
| 图 2 | g03085741 |
- 向冷却系统加注冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
End By: 拆下燃油滤清器滤芯。 请参阅 拆解和组装, "燃油滤清器 - 拆卸和安装"。
Caterpillar Information System:
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
3500 Engines Camshaft
3500 Engines Camshaft
C7.1 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
3500 Engines Camshaft
3500C Marine Engines Fuel Injector
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
C175-16 Locomotive Engine Fuel Lines - High Pressure Common Rails
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Remove
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
3500 Industrial Engines Cylinder Head
C7.1 Industrial Engine Configuration Parameters
3500C Marine Engines Cylinder Head Valves
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
C7.1 Industrial Engine Soot Antenna
3500 Industrial Engines Cylinder Head Valves
3500B High Displacement Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines