Bearing (Earlier) - Replace
The bearings should be replaced periodically. The recommended interval for Pre 2.4, 2.4 EVD, and 3.0 EVD bearings is 3 years. The bearings are contained in removable cartridges. The cartridges are replaced at the same time as the bearings. The cartridges must be positioned accurately for proper operation. Only trained personnel may perform the replacement.
Caterpillar Information System:
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
3500 Engines Camshaft
3500 Engines Camshaft
C7.1 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
3500 Engines Camshaft
3500C Marine Engines Fuel Injector
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
C175-16 Locomotive Engine Fuel Lines - High Pressure Common Rails
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Remove
C7.1 Industrial Engine Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Coolant Sample (Level 1) - Obtain
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
3500 Industrial Engines Cylinder Head
C7.1 Industrial Engine Configuration Parameters
3500C Marine Engines Cylinder Head Valves
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
C7.1 Industrial Engine Soot Antenna
3500 Industrial Engines Cylinder Head Valves
3500B High Displacement Turbocharger Oil Lines