Camshaft
Show/hide table
| |
| 图 1 | g03084598 |
Show/hide table
| 技术规格 - 382-3884 凸轮轴总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 16 | 5P-0076 螺栓 | 拧紧至扭矩为 |
| 2 | 2 | 5B-5821 定位销 | 定位销的延伸量 (D) 为 |
| 3 | 2 | 4N-1650 定位销 | 定位销的延伸量 (C) 为 |
| 4 | 2 | 128-5993 止推垫圈 | 新凸轮轴上止推垫圈的槽尺寸 (A) 为 厚度为 |
| E | - | - | 轴承轴颈的直径为 |
Show/hide table
| |
| 图 2 | g03084597 |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| - | - | - | 使用以下步骤确定实际凸轮轴凸轮升程 (F)：
1. 测量凸轮轴凸轮高度 (G)。 2. 测量基圆 (H)。 3. 从凸轮轴凸轮高度值 (G) 中减去基圆 (H)。 二者之差就是实际凸轮轴凸角升程。 |
| - | - | - | 规定的凸轮轴凸轮升程 (F) 适用于：
进气凸轮为 喷油器凸轮为 排气凸轮为 |
Caterpillar Information System:
3500 Engines Camshaft
C7.1 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
3500 Engines Camshaft
3500C Marine Engines Fuel Injector
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
C175-16 Locomotive Engine Fuel Lines - High Pressure Common Rails
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Remove
C7.1 Industrial Engine Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Coolant Sample (Level 1) - Obtain
C7.1 Industrial Engine Coolant Level - Check
C4.4 Industrial Engine Coolant Extender (ELC) - Add
3500 Engines Fuel Injector Mechanism
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
3500 Industrial Engines Cylinder Head
C7.1 Industrial Engine Configuration Parameters
3500C Marine Engines Cylinder Head Valves
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace