C7.1 Industrial Engine Caterpillar


Fuel Filter Base - Primary Fuel Filter Base

Usage:

C7.1 6J6


NOTICE

Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


If necessary, install a new fuel filter element to canister (2). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (Water Separator) Element - Replace" for the correct procedure.



Illustration 1g03084516
Typical example

Tighten water in fuel switch (1) hand tight.

(3) Tighten the connection to the following torque. ... 17 N·m (13 lb ft)

(4) Tighten the bolts to the following torque. ... 44 N·m (32 lb ft)

(5) Tighten the connection to the following torque. ... 17 N·m (13 lb ft)

Caterpillar Information System:

3500 Engines Camshaft
3500C Marine Engines Fuel Injector
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
C175-16 Locomotive Engine Fuel Lines - High Pressure Common Rails
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Remove
C7.1 Industrial Engine Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Coolant Sample (Level 1) - Obtain
C7.1 Industrial Engine Coolant Level - Check
C4.4 Industrial Engine Coolant Extender (ELC) - Add
3500 Engines Fuel Injector Mechanism
C7.1 Industrial Engine Coolant (ELC) - Change
3500B and 3500C Marine Engines Fuel Injector Mechanism
3500 Engines Camshaft
3500 Engines Camshaft
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
3500 Industrial Engines Cylinder Head
C7.1 Industrial Engine Configuration Parameters
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.