Fuel Lines - High Pressure Common Rails
Show/hide table
图 1 | g03084640 |
Show/hide table
图 2 | g03084656 |
(A-A) 剖面图 (1) 258-9954 燃油接头 |
Show/hide table
图 3 | g03084658 |
(B-B) 剖面图 (2) 365-9924 齿座 |
Show/hide table
图 4 | g03085820 |
(C-C) 剖面图 (3) 260-0401 螺钉 |
Show/hide table
图 5 | g03085864 |
详图 (D) ( 4) 8T-2223 螺栓 |
Show/hide table
高压共轨的技术规格 | ||
组装前,用清洁的发动机机油润滑 O 形密封圈和纬管的两端。 | ||
项目 | 零件 | 技术规格说明 |
1 | 258-9954 燃油接头 | 拧紧至扭矩为 |
2 | 365-9924 齿座 | 拧紧至扭矩为 |
3 | 260-0401 螺钉 | 拧紧至扭矩为 |
4 | 8T-2223 螺栓 | 拧紧至扭矩为 |
Show/hide table
图 6 | g03085416 |
(5) 卡箍组件
(6) 卡箍组件 (7) 高压燃油管路 (8) 燃油返回管 (9) 螺栓 (10) 垫圈 |
Show/hide table
技术规格,适用于 327-0844 喷油管总成和 315-5619 喷油管总成 |
注:执行下述步骤,以安装后燃油管路。 注:安装前,使用清洁的发动机机油润滑管路两端。 1. 将燃油管 (7) 插入两个燃油油轨中。 2. 使用螺栓 (9) 和垫圈 (10) 将燃油管 (7) 固定到燃油油轨上。 3. 手动均匀拧紧螺栓 (9)。 4. 将回油管 (8) 安装并拧紧到两个燃油油轨中。 5. 安装卡箍 (5) 和 (6)。 6. 手动拧紧卡箍 (5) 和 (6) 安装固件。 7. 拧紧右侧螺栓 (9) 至扭矩为 8. 拧紧左侧螺栓 (9) 至扭矩为 9. 拧紧右侧螺栓 (9) 至扭矩为 10. 拧紧左侧螺栓 (9) 至扭矩为 11. 将卡箍 (5) 和 (6) 安装固件拧紧至标准扭矩。 |
Show/hide table
图 7 | g03086099 |
(13) 燃油流量限制器 |
Caterpillar Information System:
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Remove
C7.1 Industrial Engine Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Coolant Sample (Level 1) - Obtain
C7.1 Industrial Engine Coolant Level - Check
C4.4 Industrial Engine Coolant Extender (ELC) - Add
3500 Engines Fuel Injector Mechanism
C7.1 Industrial Engine Coolant (ELC) - Change
3500B and 3500C Marine Engines Fuel Injector Mechanism
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Install
2012/06/15 New O-Ring Seals Are Used for the Tube in Certain C175-16 Engine Oil Pressure Regulators {1304}
2012/06/08 A New Valve Cover Is Used on Certain C175 Engines {1107}
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Remove
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
3500C Marine Engines Fuel Injector
3500 Engines Camshaft
C7.1 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
3500 Engines Camshaft
3500 Engines Camshaft
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}