Fuel Filter Housings - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 1     |
开始:
- 拆下滤清器滤芯。 请参阅拆解和组装, "燃油滤清器 - 拆卸和安装"。
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开燃油管 (1) 。 立即盖上开口或塞上开口。
Show/hide table
图 1 | g03083188 |
- 将工具 (A) 和适当的起吊设备连接到燃油滤清器壳体 (3) 上。 燃油滤清器壳体 (3) 的重量约为 122 kg (269 lb)。
Show/hide table
图 2 | g03083742 |
- 拆下六条螺栓 (2) 后拆下燃油滤清器壳体 (3) 。
Caterpillar Information System:
C7.1 Industrial Engine Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Coolant Sample (Level 1) - Obtain
C7.1 Industrial Engine Coolant Level - Check
C4.4 Industrial Engine Coolant Extender (ELC) - Add
3500 Engines Fuel Injector Mechanism
C7.1 Industrial Engine Coolant (ELC) - Change
3500B and 3500C Marine Engines Fuel Injector Mechanism
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Install
2012/06/15 New O-Ring Seals Are Used for the Tube in Certain C175-16 Engine Oil Pressure Regulators {1304}
2012/06/08 A New Valve Cover Is Used on Certain C175 Engines {1107}
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Remove
2012/11/30 New Engine Software Is Used on Certain C27 and C32 Industrial Engines {1901, 1920}
C175-16 Locomotive Engine Fuel Lines - High Pressure Common Rails
2012/07/09 A New Alternator Belt Guard Is Used on Certain 3500 Machine Engines {7150, 7174}
3500C Marine Engines Fuel Injector
3500 Engines Camshaft
C7.1 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
3500 Engines Camshaft
3500 Engines Camshaft
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install