Fuel Injection Pump
Show/hide table
Illustration 1 | g02823436 |
Show/hide table
Specification for the 350-5194 Fuel Injection Pump Gp | |||
Item | Qty | Part | Specification Description |
Prior to installation of the fuel injector group, lubricate the bore in the cylinder head with 1P-0808 Multipurpose Grease. Use the clamp to press the injector into the bore. Do not tap on the top surface of the injector. | |||
1 | 1 | 7F-8698 Bolt | Torque to |
A | - | - | Timing dimension is |
2 | 1 | 361-9354 Fuel Injection Valve Assembly | Use the following procedure for tightening the fuel injection valve assembly:
Before assembly, lubricate the bore and the threads with 1P-0808 Multipurpose Grease. |
1. Tighten to |
|||
2. Turn to reach the final turn angle of 19 ± 1 degrees. | |||
3. Final tightening torque should be |
Caterpillar Information System:
3516C Generator Set Engines Diesel Exhaust Fluid Tank
3516C Generator Set Engines Diesel Exhaust Fluid Tank
3516C Generator Set Engines Electronic Unit Injector Wiring
3516C Generator Set Engines Fuel Injection Lines
C7.1 Industrial Engine Coolant (DEAC) - Change
3516C Generator Set Engines Engine Oil Lines
G3500 Engines Prelube Pump - Air
G3500 Engines Prelube Pump
2012/06/15 New Software Is Used On Certain Tier 3 C18 Industrial Engines {1901, 1920}
C18 Engine Product Description
C175-16 Engine Fuel System Primary Filter/Water Separator - Clean/Replace
C175-16 Locomotive Engines Fuel System Secondary Filter - Replace
3516C Generator Set Engines Fuel Injection Pump
2012/06/08 New Fuel Injectors Are Used on Certain 3500 Engines {1251, 1290}
Installation of the White Noise Back Up Alarms {7406} Installation of the White Noise Back Up Alarms {7406}
C280-12 and C280–16 Marine Engines Water Pump - Remove
C18 Marine Engine Product Description
C280-12 and C280–16 Marine Engines Water Pump - Install
2012/11/30 New Engine Software Is Used on Certain C27 and C32 Industrial Engines {1901, 1920}
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Remove
2012/06/08 A New Valve Cover Is Used on Certain C175 Engines {1107}
2012/06/15 New O-Ring Seals Are Used for the Tube in Certain C175-16 Engine Oil Pressure Regulators {1304}
C280-12 and C280–16 Marine Engines Auxiliary Water Pump - Install
3500B and 3500C Marine Engines Fuel Injector Mechanism