Auxiliary Drive (Lower Left Hand)
Show/hide table
Illustration 1 | g03045707 |
Show/hide table
Specification for 386-9945 Auxiliary Drive Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 259-4598 O-Ring Seal     | Lubricate the bore lightly with the lubricant that is being sealed.     |
2     | 1     | 107-0779 Adapter As     | Diameter of new 115-0592 Pump Drive Shaft is 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch).     |
Bore in 127-5400 Bushing after assembly is 75.000 ± 0.055 mm (2.9527 ± 0.0022 inch). |
|||
Installation depth of the bushing 1.5 ± 0.5 mm (0.06 ± 0.02 inch). |
|||
3     | 2     | 7N-7539 Thrust Washer     | Thickness of new thrust washer is 8.50 ± 0.05 mm (0.335 ± 0.002 inch).     |
Width of groove in new shaft is 8.75 ± 0.10 mm (0.344 ± 0.004 inch). |
|||
4     | 1     | 7C-3261 Shaft     | Diameter of shaft is 105.88 ± 0.02 mm (4.168 ± 0.001 inch).     |
5     | 1     | 420-2042 Gear As     | Bore in the 116-1365 Bearing for shaft is 105.970 ± 0.010 mm (4.1720 ± 0.0004 inch).     |
Installation depth of the bearing is 2.3 ± 0.5 mm (0.09 ± 0.02 inch). |
|||
6     | 1     | 7C-3258 Thrust Washer Assembly     | Thickness of new thrust washer assembly is 7.00 ± 0.15 mm (0.276 ± 0.006 inch).     |
Caterpillar Information System:
G3500 Generator Sets Coolant (NGEC) - Change
C9.3 Tier 4 Final Engines Sensor Signal (Analog, Active) - Test
G3500 Generator Sets Coolant (DEAC) - Change
3516B Engine for the MT4400D Off-Highway Truck Flywheel
G3500 Engines Engine Oil Filter
G3516C and G3516E Gas Engines Water Pump
C7.1 Industrial Engine Product Description - Engine and Aftertreatment
G3512E Generator Set Engines Engine Oil Pan
2012/05/23 Activation Password Is Now Required For Touchscreens Of Uninterruptible Power Supplies {7451}
G3500 Generator Sets Fluid Recommendations
3512C and 3516C Marine Propulsion Engines Speed Control - Test
2012/05/21 New Clamping for the Jacket Water Bypass Tube on Certain 3500 Engines {1380, 7553}
14M Series 3 Motor Grader Brakes, Indicators and Gauges - Test
G3500 Generator Sets Coolant Level - Check
2012/05/21 Cat® Electronic Technician (Cat® ET) Improved for Configuring of Annunciator Alarm Module on Certain Cat® Products {0785, 7400}
C18 Marine Engines Engine Oil Filter Base - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Accessory Drive - Air Conditioner Compressor
C7.1 Industrial Engine Plate Locations and Film Locations - Aftertreatment System
G3500 Generator Sets Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Plate Locations and Film Locations
G3516C and G3516E Gas Engines Water Lines
G3500 Generator Sets Coolant Temperature Regulator - Replace
3516B Engine for the MT4400D Off-Highway Truck Water Lines
3516B Engine for the MT4400D Off-Highway Truck Water Lines