Flywheel
Show/hide table
Illustration 1 | g03045512 |
Show/hide table
Specification for 7N-1865 Flywheel Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 12     | 5P-8865 Bolt     | Before assembly, lubricate the threads with clean engine oil.     |
Torque to 1150 ± 60 N·m (848 ± 44 lb ft). |
Caterpillar Information System:
G3500 Engines Engine Oil Filter
G3516C and G3516E Gas Engines Water Pump
C7.1 Industrial Engine Product Description - Engine and Aftertreatment
G3512E Generator Set Engines Engine Oil Pan
2012/05/23 Activation Password Is Now Required For Touchscreens Of Uninterruptible Power Supplies {7451}
G3500 Generator Sets Fluid Recommendations
3512C and 3516C Marine Propulsion Engines Speed Control - Test
2012/05/21 New Clamping for the Jacket Water Bypass Tube on Certain 3500 Engines {1380, 7553}
C18 Marine Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C18 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
G3500 Generator Sets Coolant (DEAC) - Change
C9.3 Tier 4 Final Engines Sensor Signal (Analog, Active) - Test
G3500 Generator Sets Coolant (NGEC) - Change
3516B Engine for the MT4400D Off-Highway Truck Auxiliary Drive (Lower Left Hand)
14M Series 3 Motor Grader Brakes, Indicators and Gauges - Test
G3500 Generator Sets Coolant Level - Check
2012/05/21 Cat® Electronic Technician (Cat® ET) Improved for Configuring of Annunciator Alarm Module on Certain Cat® Products {0785, 7400}
C18 Marine Engines Engine Oil Filter Base - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Accessory Drive - Air Conditioner Compressor
C7.1 Industrial Engine Plate Locations and Film Locations - Aftertreatment System
G3500 Generator Sets Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Plate Locations and Film Locations