Inlet and Exhaust Valve Guides - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A(1) | 9U-6895 | Valve Guide Driver | 1 |
B(1) | 9U-6894 | Guide Collar | 1 |
Show/hide table
(1) | Part of 9U-7530 Engine Tool Group |
Start By:
- Remove the inlet and exhaust valves.
- Remove valve stem seal (1) from valve guide (2).
- Use Tooling (A) and a hammer to remove the valve guide from the cylinder head.
Show/hide table
Illustration 1 | g01073841 |
Show/hide table
Illustration 2 | g01073842 |
- Lubricate the bores for the valve guides with clean engine oil.
- Install valve guide (2) in the cylinder head with Tooling (A) and Tooling (B).
Note: Tooling (B) must be used in order to install the valve guide to the correct height.
Height to top of valve guide from cylinder head surface ...
35.00 ± 0.50 mm (1.378 ± 0.020 inch) Note: For more information, refer to Specifications, "Cylinder Head Valves".
- Install valve stem seal (1) on the valve guide.
End By:
- Install the inlet and exhaust valves.
Caterpillar Information System:
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
G3516C and G3516E Gas Engines Camshaft Bearing Position
C18 Marine Engines Turbocharger - Remove and Install
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C18 Marine Engines Electronic Unit Injector - Remove and Install
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
G3500B Engines Crankshaft
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
C18 Marine Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
2012/05/21 New Clamping for the Jacket Water Bypass Tube on Certain 3500 Engines {1380, 7553}
3512C and 3516C Marine Propulsion Engines Speed Control - Test
G3500 Generator Sets Fluid Recommendations
2012/05/23 Activation Password Is Now Required For Touchscreens Of Uninterruptible Power Supplies {7451}
G3512E Generator Set Engines Engine Oil Pan
C7.1 Industrial Engine Product Description - Engine and Aftertreatment
G3516C and G3516E Gas Engines Water Pump
G3500 Engines Engine Oil Filter
3516B Engine for the MT4400D Off-Highway Truck Flywheel
G3500 Generator Sets Coolant (DEAC) - Change
C9.3 Tier 4 Final Engines Sensor Signal (Analog, Active) - Test