Crankshaft
Show/hide table
Illustration 1 | g03043276 |
Show/hide table
Specification for 246-1552 Crankshaft Gp | |||
Item | Qty | Part | Specification Description |
Refer to Specifications, "Connecting Rod And Main Bearing Journals" for more information. | |||
1 | 2 | 7C-6209 Thrust Plate | Use only on the rear main bearing as shown in the Illustration 1. |
- | - | - | End play for the new crankshaft is |
2 | 10 | 2W-2288 Plug | Torque to |
3 | 60 | 128-4845 Bolt As | Use the following procedure in order to tighten the bolts:
1. Before assembly, lubricate the threads, the shank, the washer, and the underside of the bolt head with Molylube. 1. Tighten each bolt to 2. Rotate each bolt for an additional turn of 120 ± 5 degrees. |
Caterpillar Information System:
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
3512C and 3516C Marine Engines Fumes Disposal System
C7.1 Industrial Engine Cooling System
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
3512C and 3516C Marine Engines Turbocharger
2012/07/31 New Software Is Used for Certain G3516 Engines with the ADEM 3 Electronic Control Module (ECM) and NO<SUB>x</SUB> Feedback {1901, 1920}
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
C18 Marine Engines Electronic Unit Injector - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
C18 Marine Engines Turbocharger - Remove and Install
G3516C and G3516E Gas Engines Camshaft Bearing Position
C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}
C18 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
C18 Marine Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install