A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
- Caterpillar Products:
- 3500 Family Generator Sets and Power Modules
- 3500 Family Pumpers
- 3500C Engines
- G3500 Family Generator Sets and Power Modules
- Engine: Commercial
- G3500 Family
- Engine: Generator Set
- 3500 Series
- Engine:
- All 3600
- All C280 Engines
- All G3600
Show/hide table
Illustration 1 | g03043636 |
(1) Tee hose |
The new 388-2514 Tee Hose is available for use in place of the original 217-6692 Tee Hose .
The new 388-2514 Tee Hose is made with a material that is more resistant to heat.
If the original 217-6692 Tee Hose becomes deteriorated from exposure to high temperatures, replace the tee with the new 388-2514 Tee Hose.
Caterpillar Information System:
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
3512C and 3516C Marine Engines Fumes Disposal System
C7.1 Industrial Engine Cooling System
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
3512C and 3516C Marine Engines Turbocharger
2012/07/31 New Software Is Used for Certain G3516 Engines with the ADEM 3 Electronic Control Module (ECM) and NO<SUB>x</SUB> Feedback {1901, 1920}
C9.3 Tier 4 Final Engines Fuel Rail Pressure Leakage Is High
C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low While Cranking
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
G3500B Engines Crankshaft
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
C18 Marine Engines Electronic Unit Injector - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
C18 Marine Engines Turbocharger - Remove and Install
G3516C and G3516E Gas Engines Camshaft Bearing Position
C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}