2012/09/27 Caterpillar


A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}

Usage:

793B 1HL
Caterpillar Products: Machine Engines
  • All 3500 Series



  • Illustration 1g03043636

    (1) Tee hose

    The new 388-2514 is available for use in place of the original 217-6692 Tee Hose .

    The new 388-2514 is made with a material that is more resistant to heat.

    If the original 217-6692 Tee Hose becomes deteriorated from exposure to high temperatures, replace the tee with the new 388-2514 .

    Caterpillar Information System:

    301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
    UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
    UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
    UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
    3512C and 3516C Marine Engines Fumes Disposal System
    C7.1 Industrial Engine Cooling System
    3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
    3512C and 3516C Marine Engines Turbocharger
    2012/07/31 New Software Is Used for Certain G3516 Engines with the ADEM 3 Electronic Control Module (ECM) and NO<SUB>x</SUB> Feedback {1901, 1920}
    C9.3 Tier 4 Final Engines Fuel Rail Pressure Leakage Is High
    C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low While Cranking
    C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low
    2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
    3516B Engine for the MT4400D Off-Highway Truck Turbocharger
    G3500B Engines Crankshaft
    G3516C and G3516E Gas Engines Cylinder Block
    G3516C and G3516E Gas Engines Cylinder Block
    C18 Marine Engines Electronic Unit Injector - Remove and Install
    3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
    C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
    C18 Marine Engines Turbocharger - Remove and Install
    G3516C and G3516E Gas Engines Camshaft Bearing Position
    C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
    C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.