UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Caterpillar


Bearing (3.5 EVD or Greater) - Replace

Usage:

UPS 250 CNM
The bearings should be replaced periodically. The recommended interval for 3.5 EVD bearings is 4 years. The bearings are contained in removable cartridges. The cartridges are replaced at the same time as the bearings. The cartridges must be positioned accurately for proper operation. Only trained personnel may perform the replacement.

Caterpillar Information System:

UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
3512C and 3516C Marine Engines Fumes Disposal System
C7.1 Industrial Engine Cooling System
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
3512C and 3516C Marine Engines Turbocharger
2012/07/31 New Software Is Used for Certain G3516 Engines with the ADEM 3 Electronic Control Module (ECM) and NO<SUB>x</SUB> Feedback {1901, 1920}
C9.3 Tier 4 Final Engines Fuel Rail Pressure Leakage Is High
C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low While Cranking
C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low
C9.3 Tier 4 Final Engines Fuel Injection Pump - Test
Failure of Speed/Timing Sensors on C175-16 Generator Set Engines{1907, 1907} Failure of Speed/Timing Sensors on C175-16 Generator Set Engines{1907, 1907}
C18 Marine Engines Fuel Transfer Pump - Remove and Install
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
G3500B Engines Crankshaft
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
C18 Marine Engines Electronic Unit Injector - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
C18 Marine Engines Turbocharger - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.