C175-16 Marine Engine Caterpillar


Fuel Transfer Pump

Usage:

C175-16 M6A

Removal Procedure


    NOTICE

    Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

    Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

    Dispose of all fluids according to local regulations and mandates.



    NOTICE

    Keep all parts clean from contaminants.

    Contaminants may cause rapid wear and shortened component life.


  1. Turn the fuel supply to the OFF position.


    Illustration 1g02447596

  2. Disconnect hose assemblies (3) and (4). Disconnect tube assembly (1) and (2). Disconnect fittings (5) and (6).


    Illustration 2g02447598

  3. Remove bolts (7). Remove fuel transfer pump (8).

Installation Procedure

  1. Install fuel transfer pump (8) in the reverse order of removal.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.