C175-16 Marine Engine Caterpillar


Prelubrication Oil Pump

Usage:

C175-16 M6A

Removal Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g01993035

  1. Disconnect hose assemblies (2) and (3) from prelubrication pump (1).

  2. Disconnect harness assembly (4). Remove the nuts, washers (9), and bolts (8). Remove prelubrication pump (1). The weight of prelubrication pump (1) is approximately 21 kg (45 lb). Remove the nuts, bolts (5), and washers (9). Remove bracket (10).

Installation Procedure

  1. Install prelubrication pump (1) in the reverse order of removal.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.