C175-16 Marine Engine Caterpillar


Fuel Filter Housing

Usage:

C175-16 M6A

Removal Procedure

Start By:

  1. Remove the electronic control module.

  2. Remove the temperature control valve.


    NOTICE

    Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

    Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

    Dispose of all fluids according to local regulations and mandates.


  1. Turn the fuel supply to the OFF position.


    Illustration 1g02384956

  2. Disconnect tube assemblies (2) and (3) from fuel filter housing (1).


    Illustration 2g02384957

  3. Remove tube assemblies (4) and (5). Remove bolts (6) from the fuel filter housing. Attach a suitable lifting device to the fuel filter housing.


    Illustration 3g02384958

  4. Remove the washers and nuts (7). Remove fuel filter housing (1).

Installation Procedure

  1. Install the fuel filter housing (1) in the reverse order of removal.

End By:

  1. Install the temperature control valve.

  2. Install the temperature control valve.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.