- Compact Track Loaders:
- 272D GSL1 - Up
- 272D XHP SHY1 - Up
- Compact Skid Loaders:
- 299D HCL1 - Up
- 299D XHP NLC1 - Up
Details on the hardware and the software that make up the system and all of the subsystems will be identified. Scrolling through the various digital display windows of the IC monitoring system will be explained. Toggling between the various modes of the IC monitoring system will also be explained.
 | |
| Illustration 1 | g01331208 |
Left side panel (1) Instrument Cluster that is located on the left side panel | |
 | |
| Illustration 2 | g01331210 |
Right side panel (2) Cab Display that is located on the right side panel | |
Components
The IC monitoring system consists of the following components:
- Machine ECM
- Instrument Cluster is the display that is located on the left side panel. The Instrument Cluster is standard.
- Cab Display is the display that is located on the right side panel. The Cab Display is optional.
- Switches, Sensors, and Senders
Digital Data
The IC monitoring system provides the following digital data:
- Service Hour Meter
- Job Clock
- Diagnostics (CID-FMI)
- Machine Parameters
- Component Status
- Selection of Units
- Display of Engine RPM
- Display of System Voltage
- Selection of the Operator Digital Data Display
Alert Indicator
The IC monitoring system has the following Alert Indicator:
- Action Lamp (Response to warning level)
See this System Operation, "Output Components" for details.
Status Indicators
The IC monitoring system has the following Status Indicators:
- Hydraulic Oil Temperature
- Hydraulic Filter Bypass
- Engine Oil Pressure
- Engine Coolant Temperature
- Air Restriction
- Operator Present
- Parking Brake
- Alternator/Battery
- Machine Security System
- Implement Lockout
- Interlock Override
- Two-Speed
- Creep Control
- Continuous Flow
- Glow Plug
- Ride Control
- High Flow
- Pattern Changer
Gauges
The Cab Display of the IC monitoring system has the following gauges:
- Fuel Level
- Engine Coolant Temperature
- Hydraulic Oil Temperature
See this System Operation, "Output Components" for details.
Onboard Service Functions of the Instrument Cluster
Onboard Service Functions of the Cab Display
- Selection of the Operator Mode
- Selection of the Service Mode
- Self Test
- Momentary Push Buttons
See this System Operation, "Display Module" for details.