3500B Engines Caterpillar


Accessory Drive (Upper Left Hand)

Usage:

3516B 1NW


Illustration 1g03838796

Table 1
Specification for 8N-9166 Accessory Drive Gp 
Item  Qty  Part  Specification description 
235-3546 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 
259-4598 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 
6V-8260 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 
9X-7371 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 
441-3369 Adapter As  Inside diameter of the 127-5400 Bushing after assembly is 75.140 ± 0.055 mm (2.9583 ± 0.0022 inch)
7N-5279 Adapter As  Inside diameter of the 127-5400 Bushing after assembly is 75.000 ± 0.055 mm (2.9528 ± 0.0022 inch)
7N-5874 Auxiliary Drive Shaft  Diameter is 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch)
Width of the groove in the new auxiliary drive shaft for the thrust washer is 8.75 ± 0.10 mm (0.344 ± 0.004 inch).
7N-7539 Thrust Washer  Thickness of the new thrust washer is 8.50 ± 0.05 mm (0.335 ± 0.002 inch)
5P-0840 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 
6V-3348 O-Ring Seal  Lightly lubricate the bore with the lubricant that is being sealed. 

Caterpillar Information System:

C11 and C13 Engines Flywheel Housing Cover
3508C, 3512C and 3516C Locomotive Engines Piston and Rings
C9.3 Marine Engines Engine Speed Sensor
3412 Generator Set Engines Atmospheric Pressure Sensor
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Alternator and Regulator
C175-16 Marine Engines Emissions Certification Film
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Starting and Stopping
C175-16 Marine Engines Engine Electronics
C9 Marine Auxiliary and Generator Set Engines Coolant Temperature Regulator - Replace
C175-16 Marine Engines Engine Oil and Filter - Change
C9 Marine Auxiliary and Generator Set Engines Coolant - Change
C175-16 Marine Engines Coolant Sample (Level 1) - Obtain
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modes Of Operation
C175-16 Marine Engines Fuel System Primary Filter/Water Separator - Drain
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Air Filter Element - Clean/Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Battery - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Flywheel - Clean
C9 Marine Generator Set Severe Service Application
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Oil - Change
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Oil Level - Check
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Sight Gauge - Clean
3500B Engines for Caterpillar Built Power Modules Vibration Damper
3500C Marine Engines Stub Shaft (Front)
3508C, 3512C and 3516C Locomotive Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.