Engine Oil Pan
Show/hide table
| |
| 图 1 | g02844117 |
|
俯视图 | |
Show/hide table
| 技术规格 - 7C-9938 油底壳总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 3P-0654 O 形密封圈 | 组装前，涂抹 1P-0808 多功能润滑脂以润滑孔。 |
| 2 | 2 | 7X-1547 O 形密封圈 | 组装前，涂抹 1P-0808 多功能润滑脂以润滑孔。 |
| 3 | 2 | 0S-1590 螺栓 | 为了防止管组件 (5) 出现应力，组装期间采用下列拧紧步骤：
1. 将两个螺栓 (4) 拧紧至 2. 然后，再将两个螺栓 (3) 拧紧至 |
| 4 | 2 | 0S-1588 螺栓 | |
| 6 | 2 | 4B-2363 机油排放塞 | 拧紧至扭矩为 |
| 7 | - | - | 根据需要将 Loctite RTV Silicone Clear 涂覆在密封圈接合面上。 |
Caterpillar Information System:
G3500 Engines Engine Oil Pan
3500B and 3500C Marine Engines Engine Oil Pan
3500 Marine Engines Engine Oil Pan
C175-16 Marine Engines Engine Rating Definitions
C175-16 Marine Engines Turbocharger - Inspect
C6.6 Generator Sets Coolant Sample (Level 1) - Obtain
3116 and 3126 Marine Engines Marine Engine Performance Analysis Report (PAR)
3116 and 3126 Marine Engines Fluid Recommendations
C6.6 Generator Sets Coolant (ELC) - Change
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies User Interface
3116 and 3126 Marine Engines Belts - Inspect/Adjust/Replace
3116 and 3126 Marine Engines Transmission Control
G3500 Engines Engine Oil Pan
3500B Locomotive Engines Engine Oil Pan
C3.4B Engines for Caterpillar Built Machines Position the Valve Mechanism Before Maintenance Procedures
3116 and 3126 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect - Magnetic Pick-ups
C6.6 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY} TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057} Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800} Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
C6.6 Generator Sets Generator Winding Insulation - Test
C175-16 Marine Engines Plate Locations and Film Locations
C9.3 Marine Auxiliary Engines Rotating Rectifier - Inspect/Test
Product Identification Numbers (PIN) Location Guide Engine