Engine Oil Pan
Show/hide table
| |
| Illustration 1 | g03793542 |
Show/hide table
| Specification for 377-5896 Oil Pan Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 18 | 0L-1143 Bolt | Use the following procedure to tighten the sequence for hand torque wrench or single spindle torque tool: 1. Tighten the end bolts followed by the left and right side bolts. 2. Start with a bolt towards the center of the right and left side of the pan and work towards the ends. 3. Again tighten the three center bolts of the left and right side. 4. Again tighten all the end bolts. |
| 2 | 50 | 0T-0065 Bolt | Use the following procedure to tighten the sequence for hand torque wrench or single spindle torque tool: 1. Tighten the end bolts followed by the left and right side bolts. 2. Start with a bolt towards the center of the right and left side of the pan and work towards the ends. 3. Again tighten the three center bolts of the left and right side. 4. Again tighten all the end bolts. |
| 3 | 2 | 3P-0654 O-Ring Seal | Before assembly, apply 1P-0808 Multipurpose Grease in order to lubricate the bores. |
| 4 | 2 | 7X-1547 O-Ring Seal | Before assembly, apply 1P-0808 Multipurpose Grease in order to lubricate the bores. |
| 5 | 2 | 0S-1590 Bolt | In order to prevent stress on the tube assembly (8), use the following tightening procedure during assembly: 1. Tighten two bolts (6) to 2. Then tighten two bolts (5) to |
| 6 | 2 | 0S-1588 Bolt | |
| 8 | - | - | Before assembly, apply Loctite Quickstix 534 HI-Tack gasket sealant between gasket and oil pan to hold the gasket in place. Do not apply sealant at puzzle joints or T-joints. |
| 9 | 2 | 4B-2363 Oil Drain Plug | Torque to |
| 10 | - | - | As required, apply Loctite RTV Silicone Clear to the joints of the gasket. |
Caterpillar Information System:
3500 Marine Engines Engine Oil Pan
C175-16 Marine Engines Engine Rating Definitions
C175-16 Marine Engines Turbocharger - Inspect
C6.6 Generator Sets Coolant Sample (Level 1) - Obtain
3116 and 3126 Marine Engines Marine Engine Performance Analysis Report (PAR)
3116 and 3126 Marine Engines Fluid Recommendations
C6.6 Generator Sets Coolant (ELC) - Change
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies User Interface
3116 and 3126 Marine Engines Belts - Inspect/Adjust/Replace
3116 and 3126 Marine Engines Transmission Control
3116 and 3126 Marine Engines Alarms and Shutoffs
3116 and 3126 Marine Engines Product Description
G3500 Engines Engine Oil Pan
3500 Locomotive Engines Engine Oil Pan
G3500 Engines Engine Oil Pan
3500B Locomotive Engines Engine Oil Pan
C3.4B Engines for Caterpillar Built Machines Position the Valve Mechanism Before Maintenance Procedures
3116 and 3126 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect - Magnetic Pick-ups
C6.6 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY} TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057} Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800} Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
C6.6 Generator Sets Generator Winding Insulation - Test
C175-16 Marine Engines Plate Locations and Film Locations