C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Inlet Manifold Temperature Sensor - Remove and Install

Usage:

826K 232

拆卸步骤

  1. 将燃油供应转到 OFF 位置,并将电源断路开关转到 OFF 位置。


    图 1g02833236

  2. 断开软管组件 (1) 并将燃油滤清器底座组件 (2) 置于一边。


    图 2g02833421

  3. 断开线束组件 (4),然后拆下温度传感器 (3)。

安装步骤

  1. 按与拆卸相反的顺序安装温度传感器 (3)。

      注: 不要使用传感器的塑料部分预紧传感器。 使用传感器的金属六角部分预紧传感器。 如果使用传感器的塑料部分预紧传感器,则可能会损坏传感器。

    1. 将温度传感器 (3) 拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.