Excavator (Mini)
Show/hide table
Illustration 1 | g02876056 |
The CE plate is located on PIN plate (1) when required.
Depending on the model, the PIN Plate (1) is located on the frame near the boom foot or on the right side of the frame.
Engine Serial Number plate (2) is located on the top of the engine or is located on the top of the engine block.
The service information number plate (3) is located in the operators compartment on the base of the seat. The plate contains the engine serial number and the product identification number.
Show/hide table
Illustration 2 | g02826997 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Alternator Mounting
Product Identification Numbers (PIN) Location Guide Articulated Truck
3126B Marine Engine Fumes Disposal Filter Element - Replace
3512C and 3516C Marine Propulsion Engines Configuration Parameters
Product Identification Numbers (PIN) Location Guide Compactor (Pneumatic)
3126B Marine Engine Maintenance Interval Schedule - High Performance
3126B Marine Engine Maintenance Interval Schedule - Commercial Ratings
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
Product Identification Numbers (PIN) Location Guide Reclaimer Mixer
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending General Information
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Serial Number Plate
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Acronyms
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Symbols
349F and 352F Excavators Radio - If Equipped
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395} Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Receiving and Handling
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Site Preparation
3512C and 3516C Industrial Engines Air Lines
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Cylinder Head Valves