Turbocharger
Show/hide table
 | |
| Illustration 1 | g02812678 |
Show/hide table
| Specification for 338-3523 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 268-2960 Clamp As | Use the following procedure in order to tighten the clamp assembly: |
| 1. Before assembly, apply Loctite C5A cooper anti-seize on the threads and bearing surfaces. | |||
| 2. Torque to 12.4 to 14.7 N·m (109.7 to 130.1 lb in). |
|||
| 3. Gently tap around the clamp assembly. | |||
| 4. Again torque to 12.4 to 14.7 N·m (109.7 to 130.1 lb in). |
|||
| 2 | 4 | 6L-3005 Band Clamp | Use the following procedure in order to tighten the band clamp: |
| 1. Torque to 7.5 ± 1.0 N·m (66.4 ± 8.9 lb in). |
|||
| 2. Gently tap around the band clamp. | |||
| 3. Again torque to 7.5 ± 1.0 N·m (66.4 ± 8.9 lb in). |
|||
| 3 | 16 | 5P-7128 High Temperature Bolt | Before assembly, apply Loctite C5A cooper anti-seize on the threads and bearing surfaces. |
| 4 | 16 | 2N-2766 Locknut | Torque to 55 ± 5 N·m (41 ± 4 lb ft). |
| 5 | 4 | 9N-2038 Turbine Clamp As | Use the following procedure in order to tighten the turbine clamp assembly: |
| 1. Before assembly, apply Loctite C5A cooper anti-seize on the threads and bearing surfaces. | |||
| 2. Torque to 12.4 to 14.7 N·m (109.7 to 130.1 lb in). |
|||
| 3. Gently tap around the turbine clamp assembly. | |||
| 4. Again torque to 12.4 to 14.7 N·m (109.7 to 130.1 lb in). |
|||
Caterpillar Information System:
3516B Engine for the MT4400D Off-Highway Truck Turbocharger Oil Lines
3512C and 3516C Industrial Engines Turbocharger Oil Lines
3516B Engine for the MT4400D Off-Highway Truck Water Lines
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579} Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Linkage
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Ethernet Interface
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738} Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
3512C and 3516C Marine Propulsion Engines Event Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Block
3512C and 3516C Marine Propulsion Engines Diagnostic Trouble Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump
3512B and 3512C Petroleum Generator Set Engines Engine Speed Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Switches
3516B Engine for the MT4400D Off-Highway Truck Refrigerant Compressor
2012/01/06 New Sealing Method Between Turbocharger and Exhaust Elbow on Certain C6.6 Engines {1052, 1061}
C2.2 Generator Set Enclosures{7263, 7274} C2.2 Generator Set Enclosures{7263, 7274}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Fire Prevention and Explosion Prevention
3516C Generator Set Engines Power Is Intermittently Low or Power Cutout Is Intermittent
3516B Engine for the MT4400D Off-Highway Truck Fuel Priming Pump
3512C and 3516C Industrial Engines Fuel Priming Pump
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C13, C15, and C18 Tier 4 Final Engines DEF Tank Temperature Is High
C13, C15, and C18 Tier 4 Final Engines DEF Tank Level Is Low