Turbocharger Oil Lines
Show/hide table
 | |
| Illustration 1 | g03051423 |
Front view | |
Show/hide table
 | |
| Illustration 2 | g03051421 |
Rear view | |
Show/hide table
| Specification for 7E-5337 Turbocharger Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 6 | 0T-0055 Bolt | Before assembly, lubricate the threads and bearing surface with Loctite C5A copper anti-seize. |
| 2 | 2 | 8S-9191 Bolt | Before assembly, lubricate the threads and bearing surface with Loctite C5A copper anti-seize. |
| 3 | 4 | 238-5080 O-Ring Seal | Before assembly, lubricate the bore lightly with lubricant being sealed. |
| 4 | 4 | 3B-1915 Bolt | Before assembly, lubricate the threads and bearing surface with Loctite C5A copper anti-seize. |
| 5 | 4 | 0S-1608 Bolt | Before assembly, lubricate the threads and bearing surface with Loctite C5A copper anti-seize. |
| 6 | 8 | 112-3540 O-Ring Seal | Before assembly, lubricate the bore lightly with lubricant being sealed. |
| 7 | 1 | 250-1498 Elbow As | Before assembly, lubricate the bore lightly with lubricant being sealed. |
| 8 | 4 | 184-3230 Hose As | Before you tighten the hose assembly, orient the elbow in order to prevent twist and tension of the hose assembly. |
Caterpillar Information System:
3512C and 3516C Industrial Engines Turbocharger Oil Lines
3516B Engine for the MT4400D Off-Highway Truck Water Lines
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579} Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Linkage
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Ethernet Interface
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738} Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
3512C and 3516C Marine Propulsion Engines Event Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Block
3512C and 3516C Marine Propulsion Engines Diagnostic Trouble Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump
2011/12/23 A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Industrial Engines {1290, 1408, 1900}
3512C and 3516C Industrial Engines Turbocharger
3512B and 3512C Petroleum Generator Set Engines Engine Speed Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Switches
3516B Engine for the MT4400D Off-Highway Truck Refrigerant Compressor
2012/01/06 New Sealing Method Between Turbocharger and Exhaust Elbow on Certain C6.6 Engines {1052, 1061}
C2.2 Generator Set Enclosures{7263, 7274} C2.2 Generator Set Enclosures{7263, 7274}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Fire Prevention and Explosion Prevention
3516C Generator Set Engines Power Is Intermittently Low or Power Cutout Is Intermittent
3516B Engine for the MT4400D Off-Highway Truck Fuel Priming Pump
3512C and 3516C Industrial Engines Fuel Priming Pump
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C13, C15, and C18 Tier 4 Final Engines DEF Tank Temperature Is High