UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Caterpillar


Ethernet Interface

Usage:

UPS 250 APZ


Illustration 1g02820477

Ethernet Interface

Using the "Ethernet" option allows multiple UPSView Software users to monitor the operation of the Caterpillar UPS simultaneously. Each user must be connected to the Local Area Network (LAN) that is connected to the UPS.

Internet Interface

By using the "Ethernet" option, the Caterpillar UPS allows the user to monitor the system over the Internet by using a LAN.

  • Network monitoring requires an IP address that is statically assigned to the UPS.

  • Internet monitoring requires a LAN connection to the Internet.

E-mail Notification

The "Ethernet Connection" option enables e-mail messages to be broadcast to all recipients on the receipt list at one time for all "Notice" events and for all "Alarm" events. E-mail requires a connection to a LAN with an SMTP email server.

The e-mail messages contain the following items:

  • UPS model

  • Serial number

  • Physical location

  • Explanation of triggering event

Caterpillar Information System:

UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738} Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
3512C and 3516C Marine Propulsion Engines Event Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Block
3512C and 3516C Marine Propulsion Engines Diagnostic Trouble Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump
2011/12/23 A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Industrial Engines {1290, 1408, 1900}
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is Low
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is High
2011/12/23 A New Bolt and Washers Are Used in the Damper Guard Group of Certain C18 Marine Engines {1205, 7553}
2011/12/23 Proper Measurement for O-Ring Seal Land of Water-Cooled Exhaust Elbows on Certain Commercial Engines {1061}
C18 Generator Set Engine Oil Level Gauge - Calibrate
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Linkage
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579} Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
3516B Engine for the MT4400D Off-Highway Truck Water Lines
3512C and 3516C Industrial Engines Turbocharger Oil Lines
3516B Engine for the MT4400D Off-Highway Truck Turbocharger Oil Lines
3512C and 3516C Industrial Engines Turbocharger
3512B and 3512C Petroleum Generator Set Engines Engine Speed Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Switches
3516B Engine for the MT4400D Off-Highway Truck Refrigerant Compressor
2012/01/06 New Sealing Method Between Turbocharger and Exhaust Elbow on Certain C6.6 Engines {1052, 1061}
C2.2 Generator Set Enclosures{7263, 7274} C2.2 Generator Set Enclosures{7263, 7274}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Fire Prevention and Explosion Prevention
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.