A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Industrial Engines {1290, 1408, 1900}
- Industrial Engine:
- C9.3 (S/N: C9N1-UP)
Description of Change: The #4 fuel injector wiring harness in the 353-5939 Engine Harness As is rerouted for increased service life.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g02807096 |
Previous routing. | |
Show/hide table
 | |
| Illustration 2 | g02807137 |
New routing. | |
The routing process of the #4 injector wiring harness has been improved The harness lead is now routed further away from the rocker arm. The effective industrial engine serial number in production is C9N00669-UP.
Caterpillar Information System:
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is Low
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is High
2011/12/23 A New Bolt and Washers Are Used in the Damper Guard Group of Certain C18 Marine Engines {1205, 7553}
2011/12/23 Proper Measurement for O-Ring Seal Land of Water-Cooled Exhaust Elbows on Certain Commercial Engines {1061}
C18 Generator Set Engine Oil Level Gauge - Calibrate
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies UPS View Software
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Specifications
3516C and C175-16 Engines Selective Catalytic Reduction Air Assist Pressure Is Low
3516C and C175-16 Engines Selective Catalytic Reduction Air Assist Pressure Is High
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies System Description
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Model View Illustrations
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Electrical System
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump
3512C and 3516C Marine Propulsion Engines Diagnostic Trouble Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Block
3512C and 3516C Marine Propulsion Engines Event Codes
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738} Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Ethernet Interface
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Linkage
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579} Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
3516B Engine for the MT4400D Off-Highway Truck Water Lines
3512C and 3516C Industrial Engines Turbocharger Oil Lines
3516B Engine for the MT4400D Off-Highway Truck Turbocharger Oil Lines