Fumes Disposal Filter - Remove and Install
- Disconnect hose assemblies (1) and (4).
- Remove bolts (2) and remove fumes disposal group (3).
Show/hide table
Illustration 2 g01865808 - Remove cap (5) from housing (8).
- Remove filter (7) and remove O-ring seal (6).
Show/hide table
| |
| Illustration 1 | g02149067 |
- Install fumes disposal group (2) in reverse order of removal.
Caterpillar Information System:
3516C Generator Set Engines High Altitude Derate Occurrence
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
G3500H 60Hz Generator Sets Engine Oil Temperature Regulator - Replace
G3500 Generator Sets Coolant Temperature Regulator - Replace
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
C15 and C18 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706} Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225} Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000} Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
2011/12/21 New Improved Power Train Control Processor Software Is Now Used on Certain Marine Engines {7610, 7620}
C13 Engine for Combat and Tactical Vehicles Piston and Rings
C13 Engine for Combat and Tactical Vehicles Piston and Rings
C13 Engine for Combat and Tactical Vehicles Piston and Rings
2012/01/12 A New High Pressure Fuel Pump and Adapter Are Used on C175-16 Petroleum Engines {1251, 1251, 1290}
2011/12/19 A New Pipe Nipple Is Used in the Fuel Lines for G3606 and G3608 Engines {5479}
3516C Generator Set Engines Coolant Level Is Low
C1.5 and C2.2 Industrial Engines Crankcase Breather (Canister) - Replace
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Fuel System - Inspect
Air and Gas Starting for G3300B Engines{1451} Air and Gas Starting for G3300B Engines{1451}