C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Temperature Sensor (Catalyst Inlet) - Remove and Install

Usage:

826K 232

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     -     LOCTITE 镍基防咬合剂     -    



    图 1g02798480

  1. 断开线束组件 (1) 。

  1. 拆下夹子 (2) ,然后拆下温度传感器 (3) 。

安装步骤

  1. 按与拆卸相反的顺序安装温度传感器 (3) 。

    1. 将工具 (A) 涂抹到温度传感器 (3) 的螺纹上。

    1. 将温度传感器 (3) 拧紧至扭矩为 45 ± 5 N·m (33 ± 4 lb ft)。

Caterpillar Information System:

C9.3 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
G3500H 60Hz Generator Sets Engine Oil Temperature Regulator - Replace
G3500 Generator Sets Coolant Temperature Regulator - Replace
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
C15 and C18 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706} Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
3512C HD Locomotive Engine Catalyst Module - Replace
3512C HD Locomotive Engine Catalyst Module - Inspect
3516C Generator Set Engines High Altitude Derate Occurrence
C9.3 Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225} Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000} Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
2011/12/21 New Improved Power Train Control Processor Software Is Now Used on Certain Marine Engines {7610, 7620}
C13 Engine for Combat and Tactical Vehicles Piston and Rings
C13 Engine for Combat and Tactical Vehicles Piston and Rings
C13 Engine for Combat and Tactical Vehicles Piston and Rings
2012/01/12 A New High Pressure Fuel Pump and Adapter Are Used on C175-16 Petroleum Engines {1251, 1251, 1290}
2011/12/19 A New Pipe Nipple Is Used in the Fuel Lines for G3606 and G3608 Engines {5479}
3516C Generator Set Engines Coolant Level Is Low
C1.5 and C2.2 Industrial Engines Crankcase Breather (Canister) - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.