Solenoid Valve (ARD Main Fuel) - Remove and Install
拆卸步骤
- 卸下螺母 (1) 、垫圈 (2) 及线圈组件 (3) 。
Show/hide table
 | |
| 图 1 | g03691933 |
Show/hide table
 | |
| 图 2 | g03691934 |
- 拆下芯组件 (5) 。
- 将 O 形密封圈 (4) 从芯组件 (5) 上拆下。
安装步骤
- 按与拆卸相反的顺序安装电磁阀（ARD 主燃油）。
- 拧紧芯组件 (5) 至扭矩为 50 ± 5 N·m (37 ± 4 lb ft)。
- 拧紧螺母 (1) 至扭矩为 20 ± 3 N·m (177 ± 27 lb ft)。
Caterpillar Information System:
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
3512C HD Locomotive Engine Catalyst Module - Replace
3512C HD Locomotive Engine Catalyst Module - Inspect
3512C HD Locomotive Engine Catalyst Module - Check
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install
793F Off-Highway Truck Seat
C15 Petroleum Generator Set Before Starting Engine
C15 and C18 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install
C15 Petroleum Generator Set Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install
3516C Generator Set Engines Valve Rotator or Spring Lock Is Free
C15 Petroleum Generator Set After Starting Engine
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706} Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
C15 and C18 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
G3500 Generator Sets Coolant Temperature Regulator - Replace
G3500H 60Hz Generator Sets Engine Oil Temperature Regulator - Replace
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
3516C Generator Set Engines High Altitude Derate Occurrence
C9.3 Engines for Caterpillar Built Machines Fumes Disposal Filter - Remove and Install
Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225} Early Hour Wear of Piston Rings and Cylinder Liners due to Neglect of Air Cleaner Maintenance on Certain 3512C Petroleum Engines{1201, 1225}