Catalyst Module - Inspect
In order to inspect the catalyst module, perform the following steps:
- Inspect the catalyst module, fittings, and connections for external leaks. No leaks are acceptable.
- Inspect the catalyst module and condensation drain lines for proper water drain capabilities.
- Inspect the mounting of the catalyst module.
- Inspect the catalyst module outlet and remove any debris.
Caterpillar Information System:
3512C HD Locomotive Engine Catalyst Module - Check
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install
793F Off-Highway Truck Seat
C15 Petroleum Generator Set Before Starting Engine
C15 and C18 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install
C15 Petroleum Generator Set Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install
3516C Generator Set Engines Valve Rotator or Spring Lock Is Free
C15 Petroleum Generator Set After Starting Engine
C15 and C18 Engines for Caterpillar Built Machines Combustion Head - Remove and Install
2012/01/24 A New Bolt and Washer Are Used in the Bracket for the Fuel Injection Supply Lines on C175-16 Engines {1252, 7553}
C15 Petroleum Generator Set Fluid Recommendations
3512C HD Locomotive Engine Catalyst Module - Replace
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706} Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
C15 and C18 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579} Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
G3500 Generator Sets Coolant Temperature Regulator - Replace
G3500H 60Hz Generator Sets Engine Oil Temperature Regulator - Replace
C9.3 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install