C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Nozzle Heater Harness - Remove and Install

Usage:

826K 232

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
195-4609  油封钩 
异丙醇 


    图 1g02797790


    图 2g02797791

  1. 断开线束组件 (1),然后拆下电缆扎带 (2)。

    注: 实际的加热喷嘴是燃烧盖的组成部分并且不可维修,因此此处没显示加热喷嘴。

  2. 拆下六角螺栓 (4) 和卡箍组件。 拆下连接至加热喷嘴(未显示加热喷嘴)的线束组件 (3)。


    图 3g02480016

  3. 使用工具 (A) 拆下 O 形密封圈 (5) 和 (6)。 弃置 O 形密封圈。

安装步骤

  1. 按照相反顺序安装线束组件 (3)。

      ------ WARNING! ------

      使用异丙醇时小心从事。 避免长时间皮肤接触异丙基乙醇。

      如果吸入蒸汽,可能会导致人身伤害。只能在通风良好的地方使用。使用异丙醇时不要吸烟。

      异丙醇易燃。 不要在明火或焊接作业附近使用。使异丙醇远离超过 482°C (900°F) 的加热表面。


      注: 该连接是电气连接,而且不能使用石油基润滑剂进行润滑。 异丙醇是适用于此连接的唯一经过认可的润滑剂。

    1. 安装之前,用工具 (B) 润滑新 O 形密封圈 (5) 和 (6)。

Caterpillar Information System:

C15 Petroleum Generator Set Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install
3516C Generator Set Engines Valve Rotator or Spring Lock Is Free
C15 Petroleum Generator Set After Starting Engine
C15 and C18 Engines for Caterpillar Built Machines Combustion Head - Remove and Install
2012/01/24 A New Bolt and Washer Are Used in the Bracket for the Fuel Injection Supply Lines on C175-16 Engines {1252, 7553}
C15 Petroleum Generator Set Fluid Recommendations
C15 and C18 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Ignition Coil - Remove and Install
2012/07/19 New High-Pressure Fuel Pumps Are Used for C175-16 Engines {1251}
2012/07/20 New High-Pressure Fuel Pumps Are Used for C175 Off-Highway Truck Engines {1251}
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C15 Petroleum Generator Set Before Starting Engine
793F Off-Highway Truck Seat
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install
3512C HD Locomotive Engine Catalyst Module - Check
3512C HD Locomotive Engine Catalyst Module - Inspect
3512C HD Locomotive Engine Catalyst Module - Replace
9U-7370 Belt Tension Tester {0599, 0701} 9U-7370 Belt Tension Tester {0599, 0701}
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (ARD Main Fuel) - Remove and Install
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706} Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738} Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738} Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
C15 and C18 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.