C13 Engine for Combat and Tactical Vehicles Caterpillar


Camshaft

Usage:

C13 EMS


Illustration 1g02783981
(1) Camshaft gear

(A) Diameter of camshaft bearing journal ... 77.850 ± 0.025 mm (3.0650 ± 0.0010 inch)

The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 12.70327 ± 0.1 mm (0.50013 ± 0.00394 inch)

The lobe on the camshaft for the injector has 0.00 ± 0.05 mm (0.00000 ± 0.00197 inch) lift through the given rotation. ... 74 degrees to 254 degrees

When the injector lobe has an opening lift height of 5.23839 ± 0.038 mm (0.20624 ± 0.00150 inch), the camshaft should have an angle of rotation. ... 35 degrees

The lobe on the camshaft for the inlet has the most lift when the cam is at zero degrees of rotation. ... 12.60667 ± 0.1 mm (0.49632 ± 0.00394 inch)

The lobe on the camshaft for the inlet has 0.00 ± 0.05 mm (0.00000 ± 0.00197 inch) lift through the given rotation. ... 78 degrees to 284 degrees

When the inlet lobe has an opening lift height of 5.13544 ± 0.2 mm (0.20218 ± 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees

The lobe on the camshaft for the exhaust has the most lift when the cam is at zero degrees of rotation. ... 9.41655 ± 0.1 mm (0.37073 ± 0.00394 inch)

The lobe on the camshaft for the exhaust has 0.00 ± 0.05 mm (0.00000 ± 0.00197 inch) lift through the given rotation. ... 82 degrees to 279 degrees

When the exhaust lobe has an opening lift height of 5.27944 ± 0.2 mm (0.20785 ± 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees



Illustration 2g02266638

(2) The torque on the four bolts is ... 35 ± 8 N·m (26 ± 6 lb ft)

Caterpillar Information System:

3114, 3116, 3126 Engines Connecting Rod
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Security System - If Equipped
2011/11/29 Fuel Injection Pump on Certain C6.6 and C6.4 Engines {1251, 1274}
C11 and C13 Engines Camshaft
2012/01/06 New Location for the Air Inlet Temperature Sensor on C175-16 Generator Set Engines {1439, 7400}
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
CX48-P2300 Petroleum Transmission Transmission Relief Valve (Transmission Hydraulic Control)
C7 and C9 On-highway Engines Compression Brake - Inspect/Adjust/Replace - Cat Compression Brake
C7 and C9 On-highway Engines Air Compressor - Check
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Securing the Machine
C13 Engine for Combat and Tactical Vehicles Engine Oil Filter Base
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Transmission Planetary
A Fix Is Now Available for Loose Door Hinge Pins on Certain Generator sets{7263, 7274} A Fix Is Now Available for Loose Door Hinge Pins on Certain Generator sets{7263, 7274}
C7 and C9 On-highway Engines Emissions Warranty Information
C13 and C15 On-Highway Engines Severe Service Application
Failure of Fuel Temperature Sensors in Fuel Metering Valves on Certain G3500B Engines{1917, 1924} Failure of Fuel Temperature Sensors in Fuel Metering Valves on Certain G3500B Engines{1917, 1924}
Oil Leaks from the Accessory Drives of Certain 3500 and G3500 Engines{1207} Oil Leaks from the Accessory Drives of Certain 3500 and G3500 Engines{1207}
2011/12/07 A New Common Rail Fuel Pump Is Now Used on Certain C9.3 Engines {1251, 1290}
C7 and C9 On-highway Engines Grounding Stud - Inspect/Clean/Tighten
C13 and C15 On-Highway Engines Coolant Sample (Level 1) - Obtain - On-highway Engines Only
2011/12/07 Improved Clamping for the Oil Supply Tube on a 3516C Generator Set Engine {1307}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.