Show/hide table
|
|
|
| Illustration 1 | g02783981 |
|
(1) Camshaft gear |
(A) Diameter of camshaft bearing journal ... 77.850 ± 0.025 mm (3.0650 ± 0.0010 inch)
The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 12.70327 ± 0.1 mm (0.50013 ± 0.00394 inch)
The lobe on the camshaft for the injector has 0.00 ± 0.05 mm (0.00000 ± 0.00197 inch) lift through the given rotation. ... 74 degrees to 254 degrees
When the injector lobe has an opening lift height of 5.23839 ± 0.038 mm (0.20624 ± 0.00150 inch), the camshaft should have an angle of rotation. ... 35 degrees
The lobe on the camshaft for the inlet has the most lift when the cam is at zero degrees of rotation. ... 12.60667 ± 0.1 mm (0.49632 ± 0.00394 inch)
The lobe on the camshaft for the inlet has 0.00 ± 0.05 mm (0.00000 ± 0.00197 inch) lift through the given rotation. ... 78 degrees to 284 degrees
When the inlet lobe has an opening lift height of 5.13544 ± 0.2 mm (0.20218 ± 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees
The lobe on the camshaft for the exhaust has the most lift when the cam is at zero degrees of rotation. ... 9.41704 ± 0.1 mm (0.37075 ± 0.00394 inch)
The lobe on the camshaft for the exhaust has 0.00 ± 0.05 mm (0.00000 ± 0.00197 inch) lift through the given rotation. ... 83 degrees to 279 degrees
When the exhaust lobe has an opening lift height of 5.57259 ± 0.2 mm (0.21939 ± 0.00787 inch), the camshaft should have an angle of rotation. ... 32 degrees
