An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
- Caterpillar Products:
- All
An improved 5P-8500 Key is now available. The design of the new key incorporates the following improvements:
Show/hide table
Illustration 1 | g02783256 |
Old style Cat key. |
Show/hide table
Illustration 2 | g02783257 |
New style Cat key. |
- (1) The key ring was moved to the bottom of the key. This design change will improve the orientation of the key into the lock assembly.
- (2) The over mold shape was changed to improve the fit of the key in the hand. This change will also improve the orientation of the key into the lock assembly.
- (3) A new brass material is now being utilized which has a low iron content. The material change will improve the strength in the cross section of the key.
- (4) Over mold material around the key ring was removed to improve the fit on a key ring.
Caterpillar Information System:
Diesel Particulate Filter Regeneration on C7.1 Engines{108F} Diesel Particulate Filter Regeneration on C7.1 Engines{108F}
New Engine Software Is Available for Tier 4 Interim C9.3 Through C18 Industrial and Machine Engines{1901, 1902, 1920} New Engine Software Is Available for Tier 4 Interim C9.3 Through C18 Industrial and Machine Engines{1901, 1902, 1920}
Revised Start-Up Procedure For Uninterruptible Power Supply UPSB 125/130 {4480} Revised Start-Up Procedure For Uninterruptible Power Supply UPSB 125/130 {4480}
2012/01/12 A New Hose Is Used in the Fuel Filter Lines on C175-16 Generator Set Engines {1261, 1274}
2011/12/19 New Fuel Injectors and New Software Are Used for C175-16 Generator Set Engines {1251, 1254, 1290, 1713, 1901, 1920}
C7 and C9 On-highway Engines Fluid Recommendations
C7 and C9 On-highway Engines Refill Capacities
C13 and C15 On-Highway Engines Reference Information
C7 and C9 On-highway Engines Plate Locations and Film Locations
2011/12/15 Procedure to Remedy Loose V-belts on Certain C12 Marine Engines {1207, 1358, 1359, 1397}
C7 and C9 On-highway Engines Product Description
C7 and C9 On-highway Engines Maintenance Interval Schedule - C7 On-highway Engines with Shallow Sumps
C13 Engine for Combat and Tactical Vehicles Exhaust Manifold
9U-5000 Series Hydraulic Test Bench {0599, 0738} 9U-5000 Series Hydraulic Test Bench {0599, 0738}
C7 and C9 On-highway Engines Maintenance Interval Schedule - C7 Engines with Deep Sumps that are Used in School Bus Applications
C7 and C9 On-highway Engines Maintenance Interval Schedule - C7 Engines with Shallow Sumps that are Used in School Bus Applications
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095} 4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
C7 and C9 On-highway Engines Air Compressor - Check
C7 and C9 On-highway Engines Compression Brake - Inspect/Adjust/Replace - Cat Compression Brake
CX48-P2300 Petroleum Transmission Transmission Relief Valve (Transmission Hydraulic Control)
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
CX48-P2300 Petroleum Transmission Transmission Flexible Coupling
2012/01/06 New Location for the Air Inlet Temperature Sensor on C175-16 Generator Set Engines {1439, 7400}