The Lever for the Position of the Seat Cushion has been Improved on Certain Excavators {7312}
- Excavator:
- 311D (S/N: CLA1-UP; LKA1-UP; PNJ1-UP; DWR1-UP; AKW1-UP; DDW1-UP)
- Mobile Hydraulic Power Unit:
- 312D MHPU (S/N: DXH1-UP; M3L1-UP)
- 312D (S/N: SKA1-UP; JBC1-UP; RKF1-UP; PHH1-UP; FBJ1-UP; LRK1-UP; XGK1-UP; RHL1-UP; DLP1-UP; KES1-UP)
- 312E (S/N: MJD1-UP; WEY1-UP)
- 315D (S/N: JHA1-UP; KBD1-UP; TLE1-UP; BZN1-UP; CJN1-UP; JGS1-UP)
- 316E (S/N: DZW1-UP; YZZ1-UP)
- 319D (S/N: ZCA1-UP; AYF1-UP; BZH1-UP; FMH1-UP; WBJ1-UP; KFM1-UP; KRM1-UP; RJP1-UP; EAW1-UP; DAY1-UP; ZGZ1-UP)
- 320D (S/N: DFB1-UP; M4B1-UP; ZGB1-UP; HJC1-UP; DHE1-UP; TAE1-UP; A6F1-UP; A8F1-UP; BZF1-UP; KAF1-UP; KGF1-UP; MGG1-UP; MCH1-UP; TDH1-UP; XCK1-UP; FAL1-UP; RBL1-UP; KLM1-UP; SPN1-UP; WBN1-UP; WJN1-UP; BZP1-UP; GDP1-UP; GKS1-UP; PDS1-UP; SNS1-UP; YDS1-UP; EJT1-UP; SRT1-UP; BWW1-UP; EAX1-UP; GMX1-UP; PCX1-UP; PHX1-UP; BWZ1-UP; CYZ1-UP; JFZ1-UP)
- 320E (S/N: TNJ1-UP; WBK1-UP; TFX1-UP; NAZ1-UP)
- 323D (S/N: WGC1-UP; YSD1-UP; NDE1-UP; WNE1-UP; GTF1-UP; ZMF1-UP; CWG1-UP; JLG1-UP; LFL1-UP; NES1-UP)
- 323E (S/N: RAP1-UP; TDW1-UP)
- 324D (S/N: EJC1-UP; MND1-UP; BYE1-UP; JJG1-UP; ECH1-UP; TRH1-UP; BTK1-UP; JGK1-UP; SYM1-UP; AWN1-UP; TSN1-UP; DFP1-UP; JKR1-UP; JZR1-UP; JLS1-UP; JAT1-UP; PYT1-UP; CJX1-UP)
- 324E (S/N: TLF1-UP; LDG1-UP; PNW1-UP)
- 325D (S/N: GPB1-UP; NAC1-UP; KBE1-UP; PKE1-UP; C4H1-UP; DBH1-UP; C7K1-UP; ERK1-UP; RJK1-UP; C8L1-UP; LAL1-UP; MCL1-UP; C9M1-UP; A3R1-UP; GBR1-UP)
- 328D (S/N: SWF1-UP; RMX1-UP)
- 329D (S/N: MNB1-UP; XDB1-UP; BFC1-UP; J8D1-UP; BBF1-UP; CZF1-UP; DJF1-UP; L5G1-UP; JHJ1-UP; RSK1-UP; WDK1-UP; EBM1-UP; TPM1-UP; BYS1-UP; WLT1-UP; LFW1-UP; YFW1-UP; SCY1-UP; TAY1-UP; DTZ1-UP)
- 329E (S/N: RLD1-UP; TST1-UP; PLW1-UP)
- 330D (S/N: R2D1-UP; GGE1-UP; EAH1-UP; THJ1-UP; C5K1-UP; E4K1-UP; FFK1-UP; H3K1-UP; L2K1-UP; PEL1-UP; JJM1-UP; LEM1-UP; LRM1-UP; ERN1-UP; MWP1-UP; RAS1-UP)
- 336D (S/N: PTB1-UP; SKE1-UP; JBF1-UP; J2F1-UP; PRF1-UP; LMG1-UP; MYG1-UP; KDJ1-UP; L5K1-UP; WRK1-UP; W3K1-UP; MPL1-UP; ZML1-UP; PPN1-UP; MYP1-UP; M2P1-UP; JER1-UP; JWR1-UP; DTS1-UP; MDS1-UP; NLS1-UP; JBT1-UP; KKT1-UP; M4T1-UP; WET1-UP; PGW1-UP; EMX1-UP; L5X1-UP)
- 336E (S/N: YCE1-UP; GTJ1-UP; YEP1-UP; CMR1-UP; BZY1-UP)
- 345C (S/N: TBA1-UP; L5B1-UP; SPC1-UP; WDE1-UP; GBH1-UP; GPH1-UP; SCN1-UP; M2R1-UP; D3S1-UP; LYS1-UP; BWY1-UP)
- 345D (S/N: DPA1-UP; BYC1-UP; HLC1-UP; RGD1-UP; RAE1-UP; YEE1-UP; NEG1-UP; RGG1-UP; EEH1-UP; KFH1-UP; RAJ1-UP; MLK1-UP; NLM1-UP; L5R1-UP; FES1-UP; PBT1-UP; LKY1-UP)
- 349D (S/N: JGB1-UP; WTD1-UP; NNF1-UP; PZG1-UP; RBJ1-UP; MEN1-UP; KHS1-UP)
- 349E (S/N: DGE1-UP; TFG1-UP; RGH1-UP; KCN1-UP; KFX1-UP; MPZ1-UP; WHZ1-UP)
- 365C (S/N: ELC1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
- 374D (S/N: PJA1-UP; PAP1-UP; PAS1-UP; PAX1-UP)
- 385C (S/N: EDA1-UP; MMA1-UP; KGB1-UP; SBE1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
- 390D (S/N: WAG1-UP; BYP1-UP; WAP1-UP; WBT1-UP; KCZ1-UP)
- 315D MHPU (S/N: HLG1-UP)
- 320D MHPU (S/N: MMD1-UP; PRR1-UP; GPX1-UP)
- 323D MHPU (S/N: DCJ1-UP)
- 324D MHPU (S/N: M4A1-UP; KJR1-UP)
- 325D MHPU (S/N: SRC1-UP; C3N1-UP; X3N1-UP)
- 329D MHPU (S/N: J9D1-UP; L5H1-UP)
- 329E MHPU (S/N: K2L1-UP)
- 330D MHPU (S/N: D3D1-UP; H3D1-UP; M3D1-UP; GMN1-UP)
- 336D MHPU (S/N: J6D1-UP; M3M1-UP; M3N1-UP; M3S1-UP; JRX1-UP; NBZ1-UP)
- 336E MHPU (S/N: T3Z1-UP)
- 345C MHPU (S/N: M3E1-UP; M3F1-UP)
- 345D MHPU (S/N: P5D1-UP)
- 349D MHPU (S/N: DKN1-UP)
- 349E MHPU (S/N: S3P1-UP)
- 365C MHPU (S/N: GSZ1-UP)
- 374D MHPU (S/N: JNZ1-UP)
- 385C MHPU (S/N: MSF1-UP; M3P1-UP; M3W1-UP)
- 390D MHPU (S/N: M1M1-UP)
The lever for the positioning of the seat cushion has been improved. The material has changed from plastic to steel. The pushing spring has also been changed from a bar spring to a coil spring. The new parts improve the latching mechanism to provide better friction to the positioning pin.
Procedure to Replace the Lever and Spring
- Remove the seat cushion from the seat frame.
Show/hide table
Illustration 1 | g02777056 |
(1) Bar spring (2) Plastic lever (3) New coil spring (4) New steel lever |
Show/hide table
Illustration 2 | g02777058 |
The reverse side of the seat cushion |
- Remove the lever and spring. Push out the pin that is engaged to the lever.
Show/hide table
Illustration 3 | g02777099 |
(5) Pin |
Caterpillar Information System:
2011/11/18 Improved Seal Kits are Now Used on Certain Excavators {5456, 5457, 5458}
2011/11/11 Improved Alternator Guards Are Used on Certain C32 Engines {1154, 1405}
Relay Inspection and Replacement on Certain Gensets{4460, 4493} Relay Inspection and Replacement on Certain Gensets{4460, 4493}
C11 and C13 Petroleum Engines Maintenance Interval Schedule
2011/11/29 An Improved Oil Filter Assembly Cover Is Now Used on Certain C9 Marine Engines {1306, 1308}
Procedure for Updating the C27 Engines in Certain O;K Shovel Excavators{1000} Procedure for Updating the C27 Engines in Certain O&K Shovel Excavators{1000}
2011/11/11 New Software Enhances the Cylinder Cutout Feature on Certain 3516C Generator Set Engines {1901, 1920}
3516C Generator Set Engines Restriction of Air Inlet and Exhaust
C15 and C18 Petroleum Generator Sets Circuit Breakers - Reset
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Counterweight Removal and Installation
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Gear - Lubricate
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Swing Drive Oil Sample - Obtain
3516C Generator Sets Diesel Exhaust Fluid in Cold Weather
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474} Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
2011/12/19 New Air Starter Lubricant Supply Lines Are Used on Certain C32 Marine Engines {1451}
2011/12/05 A New Mounting Procedure for the Cooling Package on Certain C15 Industrial Engines Is Required {1350}
2011/12/01 Engine Data for C7.1, C6.6, and C4.4 Engines {1000}
Procedure to Install Caterpillar Water Delivery System (<B>S/N:</B>M3J) on the 777F Off-Highway Truck{5612, 5613, 7000} Procedure to Install Caterpillar Water Delivery System (<B>S/N:</B>M3J) on the 777F Off-Highway Truck{5612, 5613, 7000}
Oil Leakage Around the Injector Wiring Harness on Certain C12 Marine and Certain 3176C Machine Engines{1290, 1408, 1900} Oil Leakage Around the Injector Wiring Harness on Certain C12 Marine and Certain 3176C Machine Engines{1290, 1408, 1900}
2012/03/02 Improved Turbocharger Oil Supply Line Is Used On Certain C18 and 3406E Commercial Engines {1052, 1307}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713} Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
3500B and 3500 Marine Propulsion Engines with EUI Option Marine Transmission Oil Level - Check
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Sidecutter
2011/12/01 New Test ECM Is Now Available for Certain Cat Engines {1901}