Snow Push Work Tool Supplement Caterpillar

Show/hide table

Personal injury or death can result from the blade falling. Block the blade before changing blade tips.

Illustration 1	g02731429

Cutting edges (1) may be damaged or worn excessively. Replace cutting edges, as needed.

1. Lower lift arms. Tilt the snow push backwards until the cutting edges are accessible.

2. Place blocks under the cutting edge that is to be replaced to prevent unexpected movement. Blocking should be placed under the mounting angle and/or the mounting blocks. Tilt the snow push slightly forward to apply light pressure on the blocking.

3. Remove the cutting edges.

4. Install new cutting edges.

5. Raise the snow push and remove the blocking.