Water Separator and Fuel Priming Pump (Primary Fuel Filter) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench Assembly     | 1     |
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Turn fuel shutoff valve (1) to the OFF position.
Show/hide table
Illustration 1 | g01312224 |
- Disconnect harness assembly (3). Disconnect hose assemblies (2). Use Tooling (A) to remove fuel filter (4). Drain the fuel from fuel filter (4) into a suitable container for storage or for disposal.
Show/hide table
Illustration 2 | g02730939 |
- Remove fuel filter base (5) .
Installation Procedure
- Install fuel filter base (5) in the reverse order of removal.
Caterpillar Information System:
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid and Relief Valve (Steering)
2011/11/18 IQAN Active Studio and IQAN Develop Service Software Now Available Through Parker {1408, 7490, 7610, 7620}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 14
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 09
2011/12/19 An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
C27 and C32 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2671 - FMI 03
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - Low Flow) (Non-Tilt
Snow Push Work Tool Supplement Caterpillar Approved Work Tools - Compatibility List
Snow Push Work Tool Supplement Operating Technique Information
773G and 775G OFF-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
Snow Push Work Tool Supplement Lifting and Tying Down the Machine
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 03
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Left Hand
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 04