C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Fuel Pressure Regulator - Remove and Install

Usage:

826K 2L3

Removal Procedure

  1. Turn the fuel supply to the Off position.


    Illustration 1g02730870

  2. Disconnect hose assembly (1) and the port connector.

  3. Disconnect hose assembly (3) and the adapter.

  4. Loosen clamp assembly (4) and remove the tube.

  5. Remove fuel pressure regulator (2).


    Illustration 2g02730877


    Illustration 3g02730887

  6. Remove check valves (5).

  7. Remove O-ring seal (6), back-up ring (7), and O-ring seal (8) from check valve (5). Repeat for the other check valve.

Installation Procedure

  1. Install fuel pressure regulator (2) in the reverse order of removal.

    1. Tighten check valves (5) to a torque of 28 ± 3 N·m (21 ± 2 lb ft).

    2. Tighten clamp assembly (4) to a torque of 8.5 ± 2 N·m (75 ± 18 lb in).

Caterpillar Information System:

416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 09
2011/12/19 An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
789D and 789D XQ Off-Highway Trucks Breather (Fuel Tank) - Replace
789D and 789D XQ Off-Highway Trucks Brake Oil Cooler Screen - Clean
789D and 789D XQ Off-Highway Trucks Brake Tank (Makeup) - Clean
120M Series 2 and 120M2 Motor Graders Machine Systems Cab - Install
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 14
2011/11/18 IQAN Active Studio and IQAN Develop Service Software Now Available Through Parker {1408, 7490, 7610, 7620}
793F AC Off-Highway Truck Hydraulic Fan and Steering System Solenoid and Relief Valve (Steering)
773G and 775G OFF-Highway Trucks Engine Supplement Water Separator and Fuel Priming Pump (Primary Fuel Filter) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2671 - FMI 03
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (4-Bank) - Low Flow) (Non-Tilt
Snow Push Work Tool Supplement Caterpillar Approved Work Tools - Compatibility List
Snow Push Work Tool Supplement Operating Technique Information
773G and 775G OFF-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
Snow Push Work Tool Supplement Lifting and Tying Down the Machine
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 3021 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.