New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
- Caterpillar Products:
- All
New software is now available for flashing Messenger displays and other controllers that use the Communications Adapter 3.
Download and use latest version of CA 3 software from website, dealer.cat.com/catet. Go to the downloads section and download the CA3 firmware.
If you have the CA3 tool kit loaded (under Programs - Caterpillar Comm Adapters) on your PC, do not download anything else to flash the CA3.
If you do not have the CA3 tool kit on your PC, download the CA3 tool kit. Install the kit on your PC. Launch the kit and follow the dialog boxes to flash the new firmware on your CA3.
New version is 1.16.44. Report any failure to your Technical Communicator.
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Stick Cylinder
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2011/12/05 New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}
2011/11/11 New Heat Exchanger Groups and Spacers Are Used on Certain C32 Marine Engines {1379}
320E and 323E Excavators Machine System Specifications Swivel
320E and 323E Excavators Machine System Specifications Travel Motor Guard
349F and 352F Excavators Machine System Specifications Hoist Solenoid Valve - Boom/Stick Regeneration
Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451} Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay That is used on C280 Marine Engines{1408, 1453, 7451}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Implement Pilot Oil)
Customer Connections for G3304B and G3306B Engines {1408, 5258} Customer Connections for G3304B and G3306B Engines {1408, 5258}
2012/01/03 Improvements Have Been Made to Manufacturing Processes of the Piston for the Track Adjuster on Certain Excavators and Mobile Hydraulic Power Units {4157}
2011/10/20 Special Instruction, REHS7410, "Customer Connections for G3304B and G3306B Engines" Is Available {1408, 5258}
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Guidance Terms
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Machine Dimensions
320D and 323D Excavators Machine System Specifications Stick Lines - Quick Coupler
320D and 323D Excavators Machine System Specifications Auxiliary Hydraulic Lines - Quick Coupler
320E and 323E Excavators Machine System Specifications Stick Cylinder Lines - Stick Lowering Control