Cab - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 140-7742     | Sleeve     | 3     |
B     | 318-1491     | Offset Wrench     | 1     |
- Attach Tooling (A) and suitable lifting devices to cab (16). The weight of cab (16) is approximately 1270 kg (2800 lb). Use Tooling (A) and the suitable lifting devices to position cab (16) onto the machine.
Show/hide table
Illustration 1 | g01411744 |
- Connect harness assembly (18) .
Show/hide table
Illustration 2 | g01411767 |
- Install bolts (17). Use Tooling (B) in order to install bolts (17) that are surrounded by the fuel tanks.
Note: If you use Tooling (B), tighten bolts (17) to a torque of 548 ± 68 N·m (405 ± 50 lb ft).
Show/hide table
Illustration 3 | g01411746 |
- Position step assembly (15) and install bolts (14). Repeat this step for the opposite side of the machine.
Show/hide table
Illustration 4 | g01411736 |
- Connect harness assemblies (13) and harness assemblies (12) .
Show/hide table
Illustration 5 | g01411727 |
- Connect harness assembly (11) .
Show/hide table
Illustration 6 | g01411723 |
- Connect ground strap (10) .
Show/hide table
Illustration 7 | g01411717 |
- Position cover (9) and install bolts (8). Repeat this step for the opposite side of the machine.
Show/hide table
Illustration 8 | g02731329 |
- Install clip (7), clip (6), and clips (5). Connect hose assemblies (4) .
Show/hide table
Illustration 9 | g01411515 |
- Connect hoses (3). Connect harness assemblies (2) .
Show/hide table
Illustration 10 | g01411507 |
- Install cover (1) .
Show/hide table
Illustration 11 | g01411502 |
End By: Separate the steering frame lock.
Caterpillar Information System:
120M Series 2 and 120M2 Motor Graders Machine Systems Cab - Remove
120M Series 2 and 120M2 Motor Graders Machine Systems Secondary Steering Pump and Motor - Install
120M Series 2 and 120M2 Motor Graders Machine Systems Secondary Steering Pump and Motor - Remove
120M Series 2 and 120M2 Motor Graders Machine Systems Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
Procedure to Retrofit the Power Access Stairway to the 789C Off-Highway Truck {1408, 7253, 7254, 7960} Procedure to Retrofit the Power Access Stairway to the 789C Off-Highway Truck {1408, 7253, 7254, 7960}
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Front)
521B and 522B Track Feller Bunchers Machine Systems Swing System
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Engine Supplement Fan and Gear Motor (Hydraulic Fan) - Remove and Install
120M Series 2 and 120M2 Motor Graders Machine Systems Articulation Cylinder - Remove and Install - Right Side
120M Series 2 and 120M2 Motor Graders Machine Systems Drawbar - Install
120M Series 2 and 120M2 Motor Graders Machine Systems Drawbar - Remove
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Engine Supplement Engine Enclosure (Hood) - Remove and Install
789D and 789D XQ Off-Highway Trucks Brake Tank (Makeup) - Clean
789D and 789D XQ Off-Highway Trucks Brake Oil Cooler Screen - Clean
789D and 789D XQ Off-Highway Trucks Breather (Fuel Tank) - Replace
351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
2011/12/19 An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 09
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install