Secondary Steering Pump and Motor - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 311-1362 | Vacuum Cap | 1 |
| B | 1U-9744 | Floor Jack | 1 |
- Use two people to install secondary steering pump and motor (8). The weight of secondary steering pump and motor (8) is approximately 27 kg (60 lb). Install clamps (7). Connect hose assemblies (6) .
Show/hide table
 | |
| Illustration 1 | g02731354 |
- Connect wire assembly (5), ground strap (4), and cable assembly (3). Tighten wire assembly (5), ground strap (4), and cable assembly (3) to a torque of 19 ± 1 N·m (168 ± 9 lb in).
Show/hide table
 | |
| Illustration 2 | g02731353 |
- Use Tooling (B ) to position plate (2). The weight of plate (2) is approximately 45 kg (100 lb). Install bolts (1) .
Show/hide table
 | |
| Illustration 3 | g01415825 |
- Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
- Remove Tooling (A) .
Show/hide table
 | |
| Illustration 4 | g02731334 |
- Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity.
End By: Separate the steering frame lock.
Caterpillar Information System:
120M Series 2 and 120M2 Motor Graders Machine Systems Secondary Steering Pump and Motor - Remove
120M Series 2 and 120M2 Motor Graders Machine Systems Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
Procedure to Retrofit the Power Access Stairway to the 789C Off-Highway Truck {1408, 7253, 7254, 7960} Procedure to Retrofit the Power Access Stairway to the 789C Off-Highway Truck {1408, 7253, 7254, 7960}
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Axle (Front)
521B and 522B Track Feller Bunchers Machine Systems Swing System
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Engine Supplement Fan and Gear Motor (Hydraulic Fan) - Remove and Install
120M Series 2 and 120M2 Motor Graders Machine Systems Articulation Cylinder - Remove and Install - Right Side
120M Series 2 and 120M2 Motor Graders Machine Systems Drawbar - Install
120M Series 2 and 120M2 Motor Graders Machine Systems Drawbar - Remove
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Engine Supplement Engine Enclosure (Hood) - Remove and Install
521B and 522B Track Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw)
120M Series 2 and 120M2 Motor Graders Machine Systems Blade Lift Cylinder - Remove and Install
120M Series 2 and 120M2 Motor Graders Machine Systems Cab - Remove
120M Series 2 and 120M2 Motor Graders Machine Systems Cab - Install
789D and 789D XQ Off-Highway Trucks Brake Tank (Makeup) - Clean
789D and 789D XQ Off-Highway Trucks Brake Oil Cooler Screen - Clean
789D and 789D XQ Off-Highway Trucks Breather (Fuel Tank) - Replace
351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 351-1343 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
2011/10/20 New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
120M Series 2 and 120M2 Motor Graders Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
2011/12/19 An Update to the Suspension Charging and Servicing Literature is Now Available For Certain Off-Highway Trucks {0756, 7200, 7201, 7213}
793F Series AC Off-Highway Truck/Tractor Braking System MID 116 - CID 2448 - FMI 09