2011/12/14 Caterpillar


A New Engine Oil Cooler Bypass Is Used for C175-16 Engines {1307}

Usage:

C175-16 P6L
Generator Set:
C175-16 (S/N: WYB1-UP)
Engine:
C175-16 (S/N: P6L1-UP)

Description of Change: The process of hardening and coating makes the new engine oil cooler bypass valve more rugged than the previous valve.

Adaptable To: The new 362-4241 Bypass Valve replaces the previously used 2W-1969 Bypass Valve in the engines that are listed above.

The new bypass valve is adaptable to the engines that are listed above back to first production.

The new bypass valve is effective with the following serial numbers:

  • WYB00627

  • P6L00146

Caterpillar Information System:

2011/10/19 Improved Bolts and Washers Along with a New Procedure Are Used to Fasten the Pilot to the Lockup Clutch Housing {3101, 7553}
3516C Marine Engine Engine Operation
2011/12/23 Special Instruction, REHS7409, "Initial Start-Up of CG137 and G3300B Engines" Is Available {1000}
2011/11/16 A New Turbocharger Water Line Is Used for Certain 3516B and 3516C Engines {1380}
3516C Industrial Engine Product Lifting
3500 Generator Sets Engine Air Precleaner - Check/Clean
3500 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3500 Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
2011/10/28 Correct Orientation of the V-Band Clamp on the Center Housing/Turbine Housing Joint Is Needed on Certain C15 Truck Engines {1052, 1053}
C3.4B Engines Diesel Particulate Filter Active Regeneration Was Interrupted
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Electronic Control Unit - Flash Program
320E and 323E Excavators Machine System Specifications Travel Motor Guard
320E and 323E Excavators Machine System Specifications Swivel
2011/11/11 New Heat Exchanger Groups and Spacers Are Used on Certain C32 Marine Engines {1379}
2011/12/05 New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
320E and 323E Excavators Machine System Specifications Stick Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320E and 323E Excavators Machine System Specifications Bucket Cylinder
320 GC, 320 and 323 Excavator Machine Systems Specifications Track
320E and 323E Excavators Machine System Specifications Relief Valve (Boom Lowering Control Device)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.