320E and 323E Excavators Machine System Specifications Caterpillar


Boom Cylinder Lines

Usage:

320E LN DFG


Illustration 1g02727626

Table 1
Specification for 366-0863 Boom Cylinder Lines Gp  
Item  Qty  Part  Specification Description 
Distance from the centerline of the mounting pin to the support assemblies is 500 ± 5 mm (19.7 ± 0.2 inch)
366-0865 Pipe As   Torque to 76 ± 4 N·m (56 ± 3 lb ft)
8T-4196 Bolt   Torque to 32 ± 6 N·m (283 ± 53 lb in)
8T-4186 Bolt   Torque to 30 ± 7 N·m (266 ± 62 lb in)
Orient the support assemblies to 60 ± 3 degrees . 

Caterpillar Information System:

312F and 313F Excavators Plate Locations and Film Locations
3512C and 3516C Marine Auxiliary and Generator Set Engines Gauges and Indicators
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Engine Electronics
PM3516 Power Modules Generator Bearing Temperature - Test/Record
3516C Generator Sets Maintain Selective Catalytic Reduction Inlet Temperature
XQ570 Rental Generator Set Rotating Rectifier - Check
Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620} Procedure for Downloading and Installing the EMCP 4 Annunciator Film Kit for Cat® Generator Sets{4490, 7405, 7620}
2011/11/16 A New Relief Tube for the High-Pressure Fuel Pump Is Used on C175-16 Engines {1274, 1702}
320E and 323E Excavators Machine System Specifications Boom Cylinder
320E and 323E Excavators Machine System Specifications Boom - Stub Boom - 2.7 m (8.79 ft)
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
320E and 323E Excavators Machine System Specifications Boom - Fore Boom Group - 3.3 m (10.83 ft)
320E and 323E Excavators Machine System Specifications Boom Lines
Installation of the 324-7875 Control Box Gp for G3600 Engines {1917, 1924, 4460, 7426} Installation of the 324-7875 Control Box Gp for G3600 Engines {1917, 1924, 4460, 7426}
2011/12/15 A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D} 319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
2011/10/10 A New Charging Alternator Group Is Used on C18 Engines In Certain Products {1405}
3512C Petroleum Engines Data Link Configuration Status - Test
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission - Calibrate
3512C and 3516C Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace
320 GC, 320 and 323 Excavator Machine Systems Specifications Refrigerant Compressor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Electronic Control Unit - Flash Program
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.